![Oversize Spare Tire Kit [Eurovan]](http://gowesty.com/cdn/shop/products/full_39bd9fb671d7c3a1796308189bd2856a.jpg?v=1647295394&width=500)
Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.
16" Rally Style Alloy - Bare Wheel [Eurovan]
| Product: | GVW-T9-1638-B |
|---|---|
| Works With: | 1993-2003 |
| Manufacturer: | Quality Aftermarket |
| Restock ETA: | We do not have an ETA for this item at this time. |
Write a review
Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
New rally style wheel! We now offer this quality high pressure cast wheel made specifically for the Eurovan platform. It has the correct bolt pattern and offset to mount without any modifications. This aluminum wheel is finished in Satin Black paint with clear coat.
This is a bare wheel, and does not include mounting hardware.
Fits:
• 1993-03 Eurovan
Specs:
• 16" x 7.5" aluminum alloy wheel - Black
• Offset: ET38
• Center bore: 67mm
Buy a complete set of four wheels with mounting hardware and save a few bucks!
Eurovan 16" Spare: 1993-2000 Eurovan Owners: This wheel will not fit in the spare tire bay without our Oversize Spare Tire Kit.
Torque specs: Please torque the fasteners to 95 ft.lbs.
These wheels have an ET of 38mm. The ET number is the measure of how much the bolting surface of a wheel is "offset" from the center line of the wheel. An ET of zero means that the surface where the wheel bolts to the hub is located at exactly the mid point of the wheel. So, for example on an 8" wheel, 4" are outboard of the bolt surface, and 4" are inboard. If the ET is a positive number, that indicates a "positive offset", which means the bolt surface is moved OUT from the center point of wheel, which means the wheel and tire are moved IN towards the center line of the vehicle; so they stick out of the body LESS. The BIGGER the ET number, the MORE the tire and wheel are shoved into the body, and the LESS they stick out. Ideally, the maximum amount of ET that will fit the suspension design of the vehicle should be used, so the wheel sticks out as little as possible, and is therefore less likely to rub any part of the body.