Heavy Duty "Finned" Rear Brake Drum
It's all about heat management, folks. Brakes rely on friction, and friction makes for lots of heat. To get rid of that heat, you need thermal mass and surface area. At 19.5 pounds, these heavy-duty custom GW-designed drums are roughly 40% heavier than the originals. This extra mass allows for greater thermal absorption, which translates into less brake fade and quicker stopsâ€”not to mention longer life and increased resistance to warping. Our finned drums also have more surface area to dissipate that heat.
And if you're tired of having to use a big hammer to get stuck drums off, you'll be happy to know that these drums have threaded holes to screw in a bolt and pop off the drumsâ€”no hammer required!
Sold each. Two (2) required per vehicle.
Important Note: We coat our drums for better long term aesthetics than the completely bare drums that Volkswagen originally offered. These may still gather surface corrosion on some machined surfaces, but this is an aesthetic issue that will not affect performance.
The face of this drum is a bit thicker than the original; therefore, you will have less stud-to-fastener thread engagement when mounting your wheels. At 8mm of available thread (5-6 turns), the strength of the stud itself is exceeded (meaning that 5-6 rotations is plenty!), but if you want the original amount of engagement, longer studs are required. 56mm replacement studs are sold separately below. Ten (10) required per vehicle.
Note for GoWesty alloy wheels: If you are going to use this brake drum with any GW alloy wheel, you will need to purchase longer studs (56mm), sold separately below.