Q: Are these flywheel bolts for Vanagon and Bus?

A: Yes — these are a Pack of 5 custom-made, hardened class 10.9 metric internal-hex bolts (GW-N-902-268-01-5) that directly replace internal-hex flywheel/flexplate bolts (N-902-268-01). Fitment: all 1968–79 Bus and 1980–91 Vanagon 2WD/4WD, manual and automatic transmissions.

Q: Do these flexplate bolts for Bus 1976 replace the external bolt + lock plate system?

A: Yes. When replacing the 1976+ external bolt + metal lock plate system, discard the old locking plate and install these internal-hex bolts. They come pre-coated with threadlocker and are hardened class 10.9 for strength; torque bolts to 81 ft‑lbs (110 Nm) as specified.

Q: What replacement flywheel bolt torque and tools do I need (M10 hex flywheel bolts)?

A: Use a torque wrench and the GoWesty M10 Hex Bit Tool (recommended). Torque spec when replacing the external bolt/lock-plate setup: 81 ft‑lbs (110 Nm). Follow the included PDF instructions and the Flywheel & Flexplate Bolt Kit Instructions for correct sequence and threadlocker cure notes.

Q: Can I reuse old flywheel/flexplate bolts or should I replace them with this Pack of 5?

A: We recommend replacing rather than reusing. These are custom hardened class 10.9 bolts with pre-coated threadlocker designed for repeatable clamping and corrosion resistance. Replacing with a full Pack of 5 avoids fatigue or stretch issues and ensures proper torque retention and safety.

Q: How can I tell if my engine uses internal-hex bolts or the older external bolt + lock plate if I’m unsure?

A: Look at the bolt head: internal-hex bolts require an internal hex (Allen) key; the older system uses an external bolt with a separate metal locking plate. If identification is undefined, compare to photos in the PDF instructions or check for part number N-902-268-01. Contact support if still unsure.

5 flywheel bolts scattered on white background

5 flywheel bolts neatly lined up in 2 rows on white background

Thumbnail of 5 flywheel bolts scattered on white background

Thumbnail of 5 flywheel bolts neatly lined up in 2 rows on white background

Thumbnail of bolts installed on used flywheel

Flywheel & Flexplate Bolt (Pack of 5) [Bus/Vanagon]

Product:	GW-N-902-268-01-5
Works With:	1968-1991
Manufacturer:	GoWesty
Restock ETA:
Availability:
Wrench Rating:	Requires a full tool set and broad mechanical knowledge.

Does this part fit your vehicle? Find out by logging in to your account and updating your vehicle profile!

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

When replacing your flywheel (manual transmission) or flexplate (automatic transmission), it is highly recommended that the five bolts securing it to the crankshaft be replaced. This kit includes five of our custom-made, hardened class 10.9 metric internal hex bolts with a pre-coated thread locker.

Fits: All 1968-79 Bus and 1980-91 Vanagon 2WD/4WD with manual and automatic trans

Note: This internal-hex bolt kit is a direct replacement for all flywheels and flexplates originally fitted with internal-hex bolts (N-902-268-01). It also replaces the external bolt and lock plate system originally used on 1976 and later aircooled engines. If you have this other system, please discard the metal locking plate and torque the bolts to 81 ft-lbs (110Nm).

Need the right tool? No worries, we've got that, too. M10 Hex Bit Tool

Flywheel & Flexplate Bolt Kit Instructions

Engine - Crankshaft, Flexplate, & Flywheel

Moteur - Vilebrequin, plaque flexible et volant moteur

Reference numbers can be OE part numbers, superseded part numbers, and compatible part numbers. We provide this information to help ensure you're getting the right part for your needs.