I have an early model Vanagon. Will this new sending unit really work for my older van?

Great question! Yes, this is our current go-to fuel level sending unit for all Vanagons, including the early models. We've tested it extensively and found it works perfectly in both early and late model vans. So you can be confident it's the right choice for your pre-1986 Vanagon, simplifying things and ensuring a reliable fuel gauge reading.

My fuel gauge has been acting up. Is this the sending unit I need to fix it, and when's the best time to replace it?

It's definitely possible this sending unit is the culprit if your fuel gauge isn't accurate! We highly recommend replacing it when you're dropping the fuel tank for any reason, like resealing the vapor control system. Doing it at the same time saves you from a big hassle later. Remember, dropping that tank is a lot of work, so tackling it while you're already there prevents a second, unnecessary job down the road. It's the perfect opportunity to get this part updated.

I've heard these can be a bit tricky to install. What should I watch out for with this Vanagon sending unit?

That's a savvy question that shows you're thinking ahead! While this is a great part, the plastic locking ramps on aftermarket units can sometimes be a little looser than factory originals. The key is to be patient during installation. If it feels like it's binding when you try to rotate it into place, don't force it. Just carefully trim any rough spots on those ramps with a razor blade until it turns smoothly. We also suggest lubricating the O-ring with white lithium grease and making sure to compress it firmly as you clock the sender home. Following these tips will make the installation much smoother.

This is for a 2WD Vanagon, right? What if I have a 4WD Syncro?

You are absolutely correct! This particular fuel level sending unit is designed specifically for 2WD Vanagons. If your Vanagon is a 4WD Syncro model, you will indeed need a different sending unit. We have the correct one available right [here] – just click the link within the product description to find the specific part for your Syncro.

Vanagon fuel tank sending unit with float, white plastic base, wire arm, and O-ring on white background

Vanagon fuel tank level sender with white plastic housing and black float arm on white background

Fuel tank sending unit with black float and white plastic mounting base on white background

Close-up of white automotive fuel pump assembly component with metal rod and red guide lines.

Thumbnail of Unité d'envoi de niveau de carburant

Thumbnail of Vanagon fuel tank sending unit with float, white plastic base, wire arm, and O-ring on white background

Thumbnail of Vanagon fuel tank level sender with white plastic housing and black float arm on white background

Thumbnail of Fuel tank sending unit with black float and white plastic mounting base on white background

Thumbnail of Close-up of white automotive fuel pump assembly component with metal rod and red guide lines.

Unité d'envoi de niveau de carburant

Product:	251-919-051K-AM
Works With:	1980-1991
Manufacturer:	GoWesty/Quality Aftermarket
Restock ETA:
Expected to ship:
Availability:

$69.95 - $72.95

Quantité:

Log into your account or update the vehicle in your profile to view compatability.

After logging in or updating your vehicle, return here and refresh compatibility.

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

Capteur de niveau de carburant pour tous les Vanagon 2 roues motrices. Comprend un joint torique standard en caoutchouc noir, ou optez pour un joint torique en Viton GoWesty Durogreen d’origine. Nous recommandons vivement ce dernier.

Nous proposions autrefois les capteurs de niveau de carburant pour les modèles anciens (251-91-051E) et récents (251-919-051K). Après les avoir testés sur nos fourgonnettes, nous avons découvert que le capteur pour les modèles récents peut être utilisé sur les modèles anciens ! Nous ne vendons désormais que le 251-919-051K pour toutes les années-modèles de Vanagon. Nous sommes ravis des résultats obtenus avec ce modèle et nous pensons que vous le serez aussi.

Compatible avec : Tous les Vanagon 2 roues motrices de 1980 à 1991 - Cette pièce n’est pas compatible avec les modèles 4 roues motrices Syncro. Vous trouverez le capteur correspondant ici.

Remarque : Si vous retirez votre réservoir de carburant pour refaire l’étanchéité du système de contrôle des vapeurs, c’est le moment idéal pour remplacer le capteur. Si vous ne le faites pas et qu’il tombe en panne, vous devrez retirer à nouveau le réservoir de carburant pour le remplacer. Un homme sage a dit un jour : « Il y a toujours le temps de bien faire les choses la deuxième fois. » Faites-le bien dès la première fois ! Faites-le bien, et ne pleurez qu’une seule fois !

IMPORTANT : Le moulage des « rampes » en plastique qui maintiennent ce capteur en place sur le réservoir n’est pas aussi précis que celui de la pièce d’origine. Vous devrez peut-être les raboter légèrement (une lame de rasoir convient très bien) pour éviter que le réservoir ne s’y encastre et ne les entaille (voir photo ci-dessus). Lors de l’installation, si vous constatez que le capteur ne tourne plus librement jusqu’à sa position finale, arrêtez-vous et retirez-le. Inspectez les rampes et limulez les zones où le plastique est entaillé. De plus, nous vous recommandons vivement de lubrifier le joint torique avec de la graisse au lithium blanc. Vous devez comprimer fermement le joint torique pour positionner correctement le capteur.

To download or print these instructions, please click the arrow in the top right hand corner of the viewer below.

2WD Fuel Level Sender Installation Instructions

Système de jauge de carburant du Vanagon : comment diagnostiquer, vérifier et calibrer
Réservoirs de carburant et capteurs de niveau : une étude

What is Viton you ask?

Well, Viton is a fluorocarbon-based fluoroelastomer. Cool! It is considered one of the best synthetic rubber materials available. It is known for its ability to withstand extreme temperatures and fluid resistance, making it the ideal material for harsh environments. It is often used in the aerospace and automotive industries where exposure to high temperatures, fuel, oil, and other chemicals is common. It is tough and durable, with great abrasion and tear resistance. It is famous for its fluid resistance and ability to withstand exposure to aggressive fuels, oils, acids, gases, hydrocarbons, and other chemicals. Viton also has a strong resistance to UV exposure, oxidation, ozone, weathering, and molds. So yeah, it is really good stuff!

The material used to make this Viton (FKM) product conforms to the following testing standards: ASTM D-2240, D-412, D-792, D-573, and D-471

At GoWesty, we know materials matter—especially when it comes to elastic polymer (“rubber”) parts. Do you ever wonder why OEM parts seem to last many years, but often the replacement parts break down in a matter of months? It’s because manufacturers had to support every part of their vehicles for at least ten years or suffer the consequences of customer dissatisfaction and ultimately loss of sales. The devil is in the details when it comes to the stuff of which parts are made. Just because it looks the same doesn’t mean it is the same! You can have two identical-looking parts in your hand and one of them might be complete junk. If you have a DuroGreen GoWesty part in your hand, you can rest assured it is made of the very best, high-quality material for the application.

We make our proprietary polymer parts green so you can tell it is a genuine, properly engineered, maximum-durability part available only from GoWesty!

Every DuroGreen product comes with a 10-year, no-hassle, 100% satisfaction guarantee.

No-questions-asked refunds are available within the first six months. If you don’t like it, return it for a full refund.

10-year replacement warranty coverage applies to the original owner for any DuroGreen item that is used for the intended application.

Coverage applies to material defects only. If a product fails within the coverage period, we’ll replace it.

Labor and shipping fees are excluded.

Tableau de bord électrique

Reference numbers can be OE part numbers, superseded part numbers, and compatible part numbers. We provide this information to help ensure you're getting the right part for your needs.

251-919-051K
251919051K

Unité d'envoi de niveau de carburant

INSTRUCTIONS

Articles

Viton Rubber

Durogreen

10-Year Warranty

Schematics

Reference Numbers

Reviews

To download or print these instructions, please click the arrow in the top right hand corner of the viewer below.

Related Products