Will this Headliner Bracket Kit stop my Westfalia headliner from sagging?

Yes, early-model Westfalias didn't come with a support bar, which often leads to sagging over time. This bracket allows you to add late-model ingenuity to your early-model vehicle to provide the necessary support and keep your headliner in place.

What tools do I need to install the headliner bracket?

To install this bracket, you will need a rivet gun, an electric drill with a 1/8" drill bit, and a #2 Phillips bit.

Does this kit come with installation guidance?

Yes, installation instructions are included with the kit, and PDF instructions for the Headliner Bracket Kit are also available.

Is there anything I should know about the installation process?

Please note that this bracket will need to be pre-formed before installation. Some users have found it particularly helpful when installing ABS headliners to prevent sagging.

Thumbnail of Kit de support de garniture de pavillon

Thumbnail of Headliner support installed.

Kit de support de garniture de pavillon

Product:	KIT-SUPPORT-MOUTONNET
Works With:	1980-1991
Manufacturer:	GoWesty
Restock ETA:
Expected to ship:
Availability:
Wrench Rating:	Requires some hand & power tools and minimal mechanical knowledge.

Log into your account or update the vehicle in your profile to view compatability.

After logging in or updating your vehicle, return here and refresh compatibility.

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

Les Westfalia des modèles récents étaient équipées d’une barre de renfort pour le ciel de toit, contrairement aux premiers modèles, ce qui entraîne généralement un affaissement du ciel de toit au fil du temps. Cette pratique barre de renfort vous permettra d’ajouter l’ingéniosité des modèles récents à votre véhicule des premiers modèles (ou de remplacer celle de votre modèle récent si nécessaire !).

Remarque concernant l’installation : Ce support de ciel de toit doit être préformé avant l’installation. Les outils nécessaires comprennent une pistolet à riveter, une perceuse électrique avec un embout cruciforme n° 2 et un foret de 1/8 po.

Instructions d’installation incluses.