My Vanagon is a [Year] model. Will this sway bar bushing fit, and how can I be sure I'm getting the right size?

These bushings fit all Vanagon models from 1980-1991. However, VW used two different sway bar sizes: 19mm and 21mm. The easiest way to confirm which size you need is to use a 19mm or 21mm open-ended wrench. Whichever size wrench fits snugly over your sway bar is the correct size for your vehicle. We sell these bushings individually, and you'll need two per vehicle.

This says "Sold each." How many of these sway bar bushings do I actually need to buy for my Vanagon?

You'll need to purchase two of these sway bar bushings per Vanagon. This is because there's one bushing on each side of the sway bar where it connects to the body of the vehicle.

What’s the difference between the 19mm and 21mm sway bar bushings, and how do I know which one my Vanagon needs?

The difference is the inner diameter of the bushing, which must match the outer diameter of your Vanagon's sway bar. VW installed either a 19mm or a 21mm sway bar depending on the specific model year and configuration. The best way to check is to grab a 19mm and a 21mm open-ended wrench. Whichever wrench slides perfectly onto your sway bar indicates the correct bushing size you need to order.

I’m replacing my sway bar bushings. Are these a direct fit for my 1988 Vanagon, and what makes this brand a good choice?

Yes, these sway bar-to-body bushings are designed to be a direct fit for all 1980-1991 Vanagon models, including your 1988. They are a quality aftermarket replacement, offering a reliable solution to help restore your Vanagon's handling and stability. Remember to check your sway bar diameter (19mm or 21mm) before ordering to ensure you get the perfect fit!

Thumbnail of Black bushing on white background

Bague barre stabilisatrice-corps (19 mm ou 21 mm)

Product:	251-411-041
Works With:	1980-1991
Manufacturer:	Quality Aftermarket
Restock ETA:
Availability:

$1.95

Quantité:

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

Bague de barre stabilisatrice à carrosserie pour Vanagon.

Vendu à l'unité — deux requis par véhicule.

REMARQUE : VEUILLEZ MESURER VOTRE BARRE SWAY AVANT DE COMMANDER ! VW a utilisé deux tailles différentes de barres stabilisatrices : 19 mm et 21 mm. Le moyen le plus simple de mesurer est d'utiliser une clé à fourche de 19 mm et 21 mm et de l'installer sur la barre (n'importe où cela fonctionne, car la barre a le même diamètre sur toute sa longueur).

Coil Spring, Shock, and Sway Bar [Front - Syncro]

Ressort hélicoïdal, amortisseur et barre stabilisatrice [Avant - Syncro]

Coil Spring, Shock, and Sway Bar [Front - 2WD]

Ressort hélicoïdal, amortisseur et barre stabilisatrice [Avant - 2RM]

Reference numbers can be OE part numbers, superseded part numbers, and compatible part numbers. We provide this information to help ensure you're getting the right part for your needs.