Will this Hubcap Mounting Kit fit my VW and GoWesty wheels?

This kit is designed specifically for 1971-79 VW Bus, 1980-91 Vanagon, and GoWesty 15" Steel Wheels that have hubcap mounting holes in the correct locations. If you have GoWesty 15" steel wheels or stock wheels with these holes, this kit will fit perfectly. If your wheels do not have the correct mounting holes, you may need to modify them or use a different wheel.

How difficult is it to install the hubcap clips, and do I need any special tools?

Installation is straightforward and can be done at home with standard tools. The kit comes with clear, detailed instructions that help you position and secure the clips easily. Our tip: Take your time fitting each clip—if a clip feels too tight or loose after installing, you can gently bend it for a snug hubcap fit. No special tools are required; just a hammer and a punch or a similar tool for tapping in the rivets.

What should I do if my hubcaps don’t fit right or feel loose/tight after installing the clips?

If your hubcaps feel too tight, remove them and gently bend the clips outward a bit; for loose hubcaps, bend the clips more inward. Avoid using excessive force to prevent clipping or denting the hubcap. Many customers find a small adjustment solves any fitment issue. If you notice the hubcap still isn't secure, double-check the placement and tightness of each clip as shown in the included instructions.

How many mounting kits do I need for my vehicle?

Each Hubcap Mounting Kit includes enough clips and hardware to fit one wheel. If you want to install hubcaps on all four wheels, be sure to order four kits—one for each wheel. For a spare wheel or additional wheels, purchase extra kits accordingly.

What exactly is included in the kit, and will I need to buy anything else?

The kit contains all the clips and hardware you need to mount a hubcap on one GW steel wheel, along with step-by-step instructions. Hubcaps and steel wheels are sold separately. If you don't already have hubcaps or the right wheels, you'll need to purchase those in addition to this kit. Everything for mounting the clips (except basic hand tools) is included, so you can install with confidence.

Hubcap Mounting Kit for GW Steel Wheels

Name: Hubcap Mounting Kit (GW Steel Wheels)
SKU: HUBCAP-MOUNT-KIT-SINGLE
Price: 12.95 USD
Availability: InStock

Hubcap Mounting Kit (GW Steel Wheels)

Product:	HUBCAP-MOUNT-KIT-SINGLE
Works With:	1971-1991
Manufacturer:	GoWesty
Availability:	Good Stock
Wrench Rating:	Requires no or basic hand tools and no mechanical knowledge.

$12.95

Does this part fit your vehicle? Log in to your account & update your profile!

This hubcap mounting kit allows you to give your vintage van the vintage look with original-style VW chrome hubcaps! This kit allows you to install chrome hubcaps on our current model 15" steel wheels for 1971-79 Type II Bus, and all 1980-91 Vanagon models.

Follow the simple installation instructions and snap your hubcaps into action! Hubcaps, Trim Rings & 15" Steel Wheels sold separately.

Note: In order to use this kit you MUST have GoWesty 15" Steel Wheels with the correct mounting holes as shown in the photo. Get yours here.

Pro tip: All hub caps vary in size and are not always perfectly round. If your caps are fitting too tight or too loose, the first thing to do is rotate them about a about a ¼ turn at a time and try again. The cap might fit better in another orientation. If that does not work, next step is to loosen hub cap clips one at a time and press on them toward the center of the wheel (for too-tight caps), or toward the outside (for too loose caps) and hold them there while tightening the clips. Repeat this to additional clips if the fit is still not right. If that is not enough adjustment for your caps, you can use a round file to slightly elongate the hole in the wheel in/out as needed. A very little bit of movement makes a surprisingly big difference in hubcap fit.

5 stars: 2 (50%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 2 (50%)
1 star: 0 (0%)

Tight fit

They do the job but I ended up denting all my hub caps trying to get these on. Never dented a cap with the stock 14inch wheels.

Hi Kasimir, sorry to hear your hubcaps got dented! We are going to send you a e-Gift card to reimburse you for the cost of the hubcap clip kits. If you want to replace your hubcaps, here is a tip that will help prevent installation dents:

Install tip: Aftermarket chrome hubcaps can vary slightly in size. If your caps are fitting too tight or too loose, loosen hub cap clips one at a time and press on them toward the center of the wheel (for too-tight caps), or toward the outside (for too loose caps) and hold them there while tightening the clips. Repeat this to additional clips of fit is still not right. If that is not enough adjustment for your caps, you can use a round file to slightly elongate the hole in the wheel in/out as needed. A very little bit of movement makes surprisingly big difference in hubcap fit.

Wish they were included with the wheels

Wish they were included with the wheels since the wheels are pre drilled for them.

Hi Thomas, that's a fair point, but most folks buying our wheels don't install hubcaps. If we were to include a mounting kit with each sale, it would unnecessarily increase the cost of the wheels, so we have opted to sell the hubcap mounting kits separately. Folks typically prefer to only pay for what they need. Regardless, we very much appreciate your business and your feedback. All the best, GW

Great fit. Sold as one pr wheel.

Great fit. No issues. I was just too excited to order the wheels and hardware I didn't notice that each kit is for one wheel. Not 4... so I've ordered 3 more.

Nice addition to the Gowesty steel wheels

These clips make it possible to put your stock hubcaps on the "stock" looking Gowesty steel wheels. I ordered these along with my new wheels. Glad that I did. They are pretty simple and I could have fabricated something myself but now it is done and I can move on with my new wheels instead of having another project to finish. Well worth the money.