Automotive starter motor with included hardware bolts, washers, and nuts on white background

Démarreur (transmission manuelle) [Vanagon]

$149.95
Passer aux informations sur le produit
Démarreur (transmission manuelle) [Vanagon]
Product: GVW-PMS-MT-BNDL
Works With: 1976-1991
Manufacturer: GoWesty
Availability: Good Stock
Wrench Rating: Requires a full tool set and broad mechanical knowledge.

$149.95

Does this part fit your vehicle? Log in to your account & update your profile!

Enfin, un démarreur moderne à aimant permanent pour votre Bus ou Vanagon à transmission manuelle !

Ce petit bijou est minuscule comparé au démarreur d’origine, même plus petit que les démarreurs à réducteur que nous proposions autrefois, mais il fait mouche lorsqu’il s’agit de puissance ! Ce démarreur est évalué à 1,0 kW, mais nos essais confirment qu’il démarre notre moteur de 2,7 litres mieux que le démarreur à réducteur de 1,4 kW que nous proposions autrefois, et il coûte environ la moitié du prix ! Il s’agit d’un tout nouveau démarreur à montage direct, livré avec une quincaillerie d’installation neuve.

Aucun échange de démarreur usagé, aucune modification requise, et à un prix abordable par tous !

Convient aux véhicules suivants :
• Vanagon à refroidissement par air de 1980 à 1982 avec transmission manuelle
• Vanagon à refroidissement par eau de 1983 à 1991 avec transmission manuelle, y compris le Syncro
• Conversions moteur avec transmission manuelle

• Ne convient PAS aux moteurs diesel

Évaluation des clés : 2 clés pour tous les véhicules autres que le Syncro. L’installation sur les fourgonnettes 4X4 est beaucoup plus complexe et nécessite 3 clés.

Pour en savoir plus sur notre longue expérience avec les différentes versions de démarreurs pour Vanagon et Bus, nous vous invitons à lire cet article.

  • 5 stars: 20 (91%)
  • 4 stars: 2 (9%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
J
Joseph A.

I replaced my 22 year old Bosch starter that had an intermittent solenoid with this new GoWesty unit. Works great and hope to get 22 years out of it.

l
levente m.

Great szervice!

D
David B.

Hey! My Syncro seems to start every time now! I can remove the steel rod and hammer that I would use to "inspire" the old one frequently.

It would have been easier to install if I had removed the skid plates first, but I was being stubborn.

On the other hand, when I installed the vacuum actuator for the rear diff lock, I predicted that if the vacuum gadget ever had to come out without removing the transaxle the roll pin connecting the shafts would have been a struggle, so it got replaced with a few tiny custom parts that didn't contribute to the five hour starter swap.

Excellent starter motor.

J
John M.

Just like the factory starter, except lighter. Also the connections perfectly match.

C
Charles M.

The starter is a technically improved design compared to the OEM Bosch starter specifically due to replacing the copper stator windings with a fixed magnet field. It's hard to tell if the starter provides a more robust start, but I feel better about the results. The old starter died with awful grinding scraping sounds. Nothing gradual about the failure, it just quit. After reading the GW tech review (recommended) I have an idea of why this happened. Two months before the starter failure I installed the GW solenoid bypass relay which provides more current directly to the starter windings, more than a 40-year-old starter motor could handle. I have confidence the starter will work as intended. I did not use the new upper bolt configuration as suggested, not enough clearance under the throttle body to pass the long bolt forward. I used the new hex bolt as a direct replacement for the OEM allen bolt. I did not remove the stud from the bell housing and stayed with the OEM configuration. I recommend this starter replacement as worthwhile preventative maintenance.
PS: No indication of where the starter was manufactured, but there is wording on the box indication the manufacturer is an American owned company.

S
Steve K.

no issues works as it should

E
Erik H.

nice new product. the only issue is the lack of information for the Synchro instal. maybe my '87 is different, but the squash nut is not needed, nor the long bolt included. The original bolt has to be used as the mount is a sealed end and not through the housing.

R
Roy H.

Good stuff, love the customer service, thanks for the help.

A
Alexander N.

Perfect fit works perfect

C
CHRISTOPHER Q.

HUGE improvement from the old original starter in my 1984 Vanagon.

A
Anonymous

It came quickly. As we are currently evacuated from our home due to a wildfire we haven’t had a chance to install it yet.

J
Jason R.

Super easy to install, fit perfectly and starts like a champ

J
John H.

Works amazingly well, and seems to start almost instantly now. One minor issue for me was that the binding post was too short. The connector from the alternator is a brass hollow cylinder almost 1/2 long, and so the binding post, with lock nuts attached, was too short to secure the main battery connector on top. Had to remove both nuts that were installed on the post, leaving it rattle around until installed, and barely had room for the lockwasher.

j
joe l.

Works great

a
andrew w.

good starter
this thing always cranks.

J
Jim V.
Great upgrade

This new starter seems 10x better than the original type starter. Makes it seem like I've got a fully charged new battery. no more long, slow power-draining start ups!

G
Gregory C.
Vanagon Starter

Great product. Works well and good price.

D
Davyian

Worked wonderfully and the hardware it came with was a cherry on top!!!

V
Vinny M.
Great Form Factor and Performance So Far

We put a rebuilt Duralast starter from Autozone in our '84 van just 5 years ago. It started intermittently failing after a few years, finally completely died recently. Didn't want to keep dealing with starters every 5 years, so I was very excited to find that Gowesty had a high quality option in stock built for our vans. The starter is much smaller so it fits easier, and is much more powerful so it sounds great cranking over. The Duralast starter sounded so pathetic I kept checking my battery voltage because it sounded like a dead battery. But sure enough, was just a junk starter.

This starter might be the most expensive of your options, but like most gowesty parts it's well worth every dollar.

J
Joel S.
spun up

Rolls engine faster. Starts easier when hot.

M
Mark R.
Got it up and running

I had a problem with my 1991 Westy not cranking over when I turned the key. So I determined it was not the fuel pump by the drop in voltage trying to turn the solenoid/starter. The problem is most likely the solenoid so I tried replacing it but alas, it was the starter. I went to GoWesty after getting a quote for a Bosch starter and found it to be about half the price. It was made in China and has, like some products made in the USA, a reputation but it's a starter and it is a pretty good bet they fine. I'm happy to be on the road again. The shipping and handling provided was exceptional.

K
Karl R.
A+

Removed the TDI starter (2nd one that's failed) for good and went to this unit. Starts faster and sounds better than the TDI ones ever did turning over my 2700CC. Original bushing was good so I kept it in there.

Pro tip for Syncro add engine carry bar extended long bolts so you can drop down the engine via the bolts to access starter much easier. Also fits much more compact with locker actuator/bracket could possibly remove starter without taking bracket apart.

Hope it holds up well but can't be as bad as the TDI starts I ran across.

S
Starter (.T.[.

003-911-023E
Is this product 1.4KW?

GoWesty

This starter is rated at 1.0 KW, but our testing confirms that it cranks our 2.7-liter engine more effectively than the 1.4 KW gear-reduction starter we previously offered.

B
Beck

Is there a pdf manual &/or video for this starter install? Maybe I am missing something. The posted PDF & video seem to cover the starter hardware only, not the starter install. Thanks!

GoWesty

The installation is the same as OEM, so we recommend referencing the Bentley repair manual for installation.