Will this Pop-top Lift Assist actually make it easier to open my Bus's pop-top?

Absolutely! This kit is designed specifically to counteract the weak or failed springs in most original pop-top lift systems. By adding two gas struts, it provides a gentle assist, making raising and lowering your pop-top feel significantly smoother and requiring much less effort, even if it's unloaded or only lightly loaded.

Do I need to drill holes in my Bus to install this pop-top lift assist?

No drilling is required! A major benefit of this GoWesty Pop-top Lift Assist kit is that it's designed for a no-drill installation. The mounting brackets attach securely at the rear hinge points, meaning you won't have to modify your Bus's body. It’s a clean and straightforward installation.

How do I know which strut strength (40-lb or 100-lb) to choose for my pop-top?

The choice depends on how much weight you typically have on your pop-top. If you generally keep it unloaded or only have very light items, the 40-pound (Light Load) struts are usually sufficient. For pop-tops that carry a bit more weight, like a lightly loaded Westfalia camper tent or gear, the 100-pound (Heavy Load) struts are recommended. Both options are designed to work with your Bus's pop-top.

What vehicles does this Pop-top Lift Assist kit work with?

This specific Pop-top Lift Assist kit is designed to fit Type II Buses from 1968 through 1979. This includes Campmobile and Westfalia Camper models, whether they have an automatic or manual transmission, and are 2WD. If you have a pop-top on a Bus from these years, this kit should be compatible.

Thumbnail of Assistance au levage Pop-Top [Bus]

Assistance au levage Pop-Top [Bus]

Product:	GW-B-POPTOP-LIFT
Works With:	1968-1979
Manufacturer:	GoWesty
Restock ETA:
Availability:
Wrench Rating:	Requires some hand & power tools and minimal mechanical knowledge.

$81.00 - $91.00

Quantité:

Does this part fit your vehicle? Find out by logging in to your account and updating your vehicle profile!

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

L'équipement de levage d'origine pour ces toits comprenait un ressort interne, mais la plupart d'entre eux ont perdu leur « punch », et soulever même un toit totalement déchargé peut être difficile.

À la demande générale, nous avons créé un kit simple pour aider en douceur à lever et abaisser un toit ouvrant déchargé ou légèrement chargé sur votre bus de type II. Cette conception ne nécessite pas de perçage à travers la carrosserie et comporte deux entretoises à gaz positionnées au niveau des points de charnière arrière. Enfiler votre haut n'a jamais été aussi agréable !

Le kit comprend :
• (2) vérins à gaz de 100 lb
• (4) Supports de montage
• Matériel de montage complet et instructions

Instructions d'installation de l'élévateur escamotable pour bus