Will this Headliner Bracket Kit stop my Westfalia headliner from sagging?

Yes, early-model Westfalias didn't come with a support bar, which often leads to sagging over time. This bracket allows you to add late-model ingenuity to your early-model vehicle to provide the necessary support and keep your headliner in place.

What tools do I need to install the headliner bracket?

To install this bracket, you will need a rivet gun, an electric drill with a 1/8" drill bit, and a #2 Phillips bit.

Does this kit come with installation guidance?

Yes, installation instructions are included with the kit, and PDF instructions for the Headliner Bracket Kit are also available.

Is there anything I should know about the installation process?

Please note that this bracket will need to be pre-formed before installation. Some users have found it particularly helpful when installing ABS headliners to prevent sagging.

Thumbnail of Headliner support installed.

Headliner Bracket Kit

Product:	HEADLINER-BRKT-KIT
Works With:	1980-1991
Manufacturer:	GoWesty
Restock ETA:
Expected to ship:
Availability:
Wrench Rating:	Requires some hand & power tools and minimal mechanical knowledge.

Log into your account or update the vehicle in your profile to view compatability.

After logging in or updating your vehicle, return here and refresh compatibility.

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

Late-model Westfalias came equipped with a headliner support bar but the early-model ones didn't, which means the headliners tend to sag over time. This handy support bar will allow you to add some late-model ingenuity to your early-model vehicle (or replace your late-model one, should it need replacing!).

Installation note: This headliner bracket will need to be pre-formed before installation. Tools needed include a rivet gun, electric drill with #2 Phillips bit, and 1/8" drill bit.

Installation instructions included.