Will this Cabinetry Edge Molding fit my VW Bus or Vanagon, and is it difficult to install?

Yes, this solid T-Molding Edge Molding is designed to fit all Volkswagen Type 2 Bus and Vanagon campers from 1968 to 1991, regardless of trim or configuration (including 2WD, 4WD, camper, weekender, or passenger vans). Installation is straightforward: just remove your old edge molding, clean the panel edge, and press the new molding into place for a snug fit. Many customers find it helpful to gently warm the molding with a hair dryer for easier bending around corners. No special tools are required.

How many feet of edge molding do I need and how is it shipped?

Edge Molding is sold by the foot, so just measure the total length of cabinetry edges you want to cover and order accordingly. For larger projects, keep in mind that each roll is a maximum of 25 feet; if your order exceeds 25 feet, it will arrive in multiple rolls. This helps you manage installation more easily and plan for seams if necessary.

What color and material options are available? Will it match my existing interior?

This Cabinetry Edge Molding is a low-profile, solid-core T-Molding made by Quality Aftermarket. It comes in four classic camper colors: black, brown, gray, and ivory. These choices allow you to closely match original or custom VW interiors from 1968-1991. Review your cabinet color before choosing for the best match—many owners have found these options blend seamlessly with most Bus and Vanagon camper interiors.

Cabinetry Edge Molding (Solid) | 105-677

Ivory plastic interior trim strip with end cap, automotive molding replacement part.

Cabinetry Edge Molding (Solid)

Product:	105-677
Works With:	1968-1991
Manufacturer:	Quality Aftermarket
Availability:	Good Stock

$1.55

Does this part fit your vehicle? Log in to your account & update your profile!

Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

Bus & Vanagon cabinetry edge molding, sometimes referred to as "T-Molding" is found in numerous areas within your camper. This low-profile, solid core molding is 11/16" in width, and is available in black, brown, gray, and ivory.

The thicker hollow "bumper" style edge molding found on the table edges (and other cabinet locations) will be available online shortly.

Sold by the foot. For ease of handling, we cut and roll this molding in maximum lengths of 25'. If you order over 25' of molding, you will receive multiple rolls.

5 stars: 11 (85%)
4 stars: 0 (0%)
3 stars: 2 (15%)
2 stars: 0 (0%)
1 star: 0 (0%)

Brown edge molding

Perfect, had a cabinet made for the potti and will use the extra to replace some old stuff. Love it.

It’s alright if you are replacing all of it. It’s not as thick as the original molding. I was hoping to add to the old stuff that was shrinking but not a great match.

Fits really well, though note that in many applications in a Westy the edge molding is trimmed to fit around cabinet latches, etc, but not a huge deal. This is a perfect color match and allows you to replace the shrunken trim that has pulled away from the corners or developed gaps. Props to VW for not gluing the molding in place!

This stuff is tough to find elsewhere. I appreciate GW offering it!

good replacement

I used this to replace all the heat-damaged and shrunken original, it looks great

Looks like the original

Looks like the original - I put it around the fridge cabinet opening and it's not quite as flat as the original though. The fridge still closes but it's tight.

Nice

If U R renewing your westy this would have the job done

Really great product easy to install

This made all the old sun shrunken trim new again.

Perfect

Perfect replacement

Excellent

Greta

Great stuff

Easy installation

quality could be better

note: color match is not exact (at least for the grey) and the material quality is significantly lower than the OEM. that being said, for the price it does the job. if you are OCD about your interior though, perhaps look elsewhere for this specific item.

My doors stay shut!

My cabinet trim had shrunk in and this helps me keep all my cabinet doors shut when I’m driving now

Would this be the correct product for the inside edge of the fridge? The piece that is on the frame itself. Thanks

GoWesty

Hi there, Nathan,

That's correct, this material is for the inside of the door frame.

Cabinetry Edge Molding (Solid)

Your cart is empty

Your cart is empty

When should we send your message?

Cabinetry Edge Molding (Solid)

RELATED PRODUCTS

Drip Rail Molding - Right Front [Vanagon]

Left Front Drip Rail Molding

Aftermarket Gutter Trim Molding

End Piece/Cap Gutter Trim (Passenger Front or Driver Rear)

End Piece/Cap Gutter Trim (Driver Front or Passenger Rear)

Chrome Trim Molding Sleeve

Complete Curtain Set [Early Vanagon]

Rear Bench Seat [MV Weekender]

Fridge Elimination Kit [Vanagon]

Compact Telescoping Ladder [All Vehicles]

BARGAIN BASEMENT - Wooden Drawer Organizer [Vanagon Westfalia Camper]

Cabinet Laminate Material [Vanagon Westfalia]

Cabinetry Edge Molding (25 Feet) [Vanagon Westfalia]

Extra Shelf for Refrigerator Elimination Kit [Vanagon]

Push Bar for Pop-Top Lifting Mechanism [Vanagon]

Interior Paint for Metal Parts [Vanagon]

BARGAIN BASEMENT - Wooden Drawer Organizer [Vanagon Westfalia]

Cabinet Handle [Vanagon Westfalia]

Bracket for Rear Table Leg Guide

Cabinetry Finishing Kit for Retractable Seat Belt [Bus/Vanagon]

Vent Block-Off Plate (Rear Heater) [Vanagon]

Westfalia Self-Tapping Screw [13mm] (Pack of 5)

Westfalia Self Tapping Screw [25mm] (Pack of 5)

Replacement Rubber Foot for Telescoping Ladder

Westfalia Self Tapping Screw (39mm)

Leather Storage Organizer [Bus]

Latch for Drawer & Door

Cabinet Handle [Bus]