Heater control valve kit with blue actuator, wiring, toggle switch, hose clamps, and connectors

100% Heat Shut-Off Valve [Vanagon]

$99.00
Skip to product information
100% Heat Shut-Off Valve [Vanagon]
Product: GW-HOTAIR-B-GONE
Works With: 1983-1991
Manufacturer: GoWesty
Availability: Only 4 Left in Stock!

$99.00

Does this part fit your vehicle? Log in to your account & update your profile!

Grab our heat shut off valve and stop roasting in your van!

That stubborn hot air pouring from the front vents that can't be stopped no matter where you set your controls is usually caused by a defective front heater valve, a bent heater control cable, or worn heater box flap seals. This allows radiator heat to sneak inside the cabin uninvited. The result? An uncomfortably warm cabin when all you want is cool, fresh air.

Meet the fix that actually works: Our heavy-duty, motorized ball valve. This bomber shut-off valve completely blocks coolant flow to the front heater core—so when you ask for no heat, you get no heat. Flip the dash-mounted switch and the valve instantly opens or closes, giving you total control over your cabin climate.

  • Instant comfort – no more fighting with stubborn heater controls.

  • Durable build – designed to last.

  • Easy operation – just one simple switch to cut off the heat flow.

  • 2 wire reverse polarity – automatically cuts off power when fully open or closed.

Stop putting up with unwanted heat. Take back control and enjoy every mile.

Fits: 1983-91 Vanagon Waterboxer

  • 5 stars: 8 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
F
Franky C.

It worked as advertised. I used it to determine an overheating issue. The van was slowly loosing coolant and I could find no leaks. I thought maybe it was the heater core or head gasket. Using the valve to isolate the heater core confirmed that the the coolant leak was not from the dashboard circulated coolant. It was a win either way. Now I can shut down the hot air that the cable controls were unable to stop and I don't have to take the dash apart looking for a leak.

R
Roy W.

Works great! Directions were easy to follow, there’s plenty of wire, and the black, rubber switch cover is a nice touch.

S
Stephen R.

It does its job perfectly.
I couldn’t turn my heater off, & driving in the summer with the heat coming in full was crazy.
It done what it was supposed to do 100%.
It’s def the cheaper option then pulling the dash apart again.

B
Brainhoare

Works great. I used to have a manual in-line valve down in front of my gear shift. I would have to lean way over to turn it. Now a flip of a switch does the job.

D
Dean K.

It's nice to turn the heat off in a vehicle that does not have air conditioning!

M
Mike P.
Mike

Had to replace the front heater blower motor. Big project. As recommended, I replaced 40 year old coolant hoses and the flow switch. The flow switch does not work well, providing heat constantly. To avoid removing the dash again, I put this switch and valve in. Love it! Took a few hours to install and gives great control of heat.

M
MG C.
Huge difference!! I had no idea

I had no idea just how much hot air was drifting into the cab. I drove from Colorado to the California High-Desert in the summer... without air conditioning. On the way there, it was very uncomfortable. I installed this while I was down there figuring that anything would be an improvement and this was a rigorous test given the time of year, the distance of the drive, and the extremely different weather conditions that I would face. The trip back was amazingly better. The weather was nearly identical. I highly recommend installing this if you drive in the summer or even just live in warm climates. You won't believe the difference.

A
Anthony S.
Hot foot? No More!

I’ve been watching this on the site since it came out. I grabbed it up on web special. Simple install, clear instructions and very effective. I’m excited for my road trip at the end of the month and to not have my right foot on fire for hours. I also purchased the blank plate since I have already deleted my rear heater, it didn’t work so I modified the existing rear heater switch to include the toggle switch for on and off.