Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.
Starter (Manual Transmission) [Vanagon]
| Product: | GVW-PMS-MT-BNDL |
|---|---|
| Works With: | 1976-1991 |
| Manufacturer: | GoWesty |
| Availability: | Good Stock |
| Wrench Rating: |
Finally, a modern permanent magnet starter for your Bus or Vanagon with manual transmission!
This puppy is tiny compared to the original starter, even smaller than the gear reduction starters we once offered—but packs a wallop when it comes to power! This starter is rated at 1.0KW, but our tests confirm it cranks our 2.7-liter engine better than the 1.4KW gear reduction starter we used to offer, and it is about half the price! This is a brand-new, direct-fit starter complete with fresh installation hardware.
No core exchange, no modifications required, and for a price anyone can afford!
Fits the following vehicles:
• 1980-82 Aircooled Vanagon with manual transaxle
• 1983-91 Watercooled Vanagon with manual transaxle, including Syncro
• Engine conversions with manual transaxle
• Will NOT fit diesel
Wrench Rating: 2 wrenches for all vehicles other than the Syncro. Installation on the 4WD vans is quite a bit more involved and deserves a 3-Wrench rating.
For the full story on our lengthy experience with various iterations of Vanagon and Bus starters—we encourage you to read this article.
We highly recommend installing our Starter to Alternator Wiring Harness Upgrade Kit when replacing your starter. Delete your old and corroded wiring while simultaneously improving the performance of multiple systems. If you retain your factory original wiring, you may need to delete the jam nut and washer from the starter solenoid post to obtain more stud length. This is perfectly safe, and will not negatively affect the durability or longevity of the starter solenoid.
To download or print these instructions, click the arrow in the top-right corner of the viewer below, then use the print or download controls in the opened document. Open PDF in a new tab
Reference numbers can be OE part numbers, superseded part numbers, and compatible part numbers. We provide this information to help ensure you're getting the right part for your needs.
Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
Product: GW-EFI
Works with: 1983-1991
Product: GVW-SCANGAUGE-KIT
Works with: 1983-1991
Product: ALT-MASTER-BUNDLE
Works with: 1983-1991
Product: GVW-TB-DF-N
Works with: 1983-1991
Product: 1-237-010-027
Works with: 1986-1991
Product: 025-906-457A
Works with: 1986-1991
Product: GVW-AL33-N
Works with: 1983-1991
Product: 003-911-023E
Works with: 1972-1991
Product: COIL-PLUG-BNDL
Works with: 1986-1991
Product: ECU-FLASHER
Works with: 1983-1991
Product: GW-LKC
Works with: 1983-1991
Product: 0-986-237-639-AM
Works with: 1986-1991
Product: D522C
Works with: 1986-1991
Product: 025-903-141HD
Works with: 1983-1991
Product: 213-4222
Works with: 1986-1991
Product: 0-280-122-014
Works with: 1983-1991
Product: 111-937-505M
Works with: 1980-1985
Product: 03-214
Works with: 1986-1991
Product: GVW-025-906-302A
Works with: 1986-1991
Product: PN-27462
Works with: 1983-1991
Product: 00061
Works with: 1983-1991
Product: GVW-MECH-TPS
Works with: 1983-1991
Product: HE568-ND
Works with: 1986-1991
Product: 021-998-031A-AM
Works with: 1972-1983
Product: ALT-HARNESS
Works with: 1983-1991
Product: VS-HALL-PIGTAIL
Works with: 1986-1991
Product: ALT-ADJUST
Works with: 1983-1991
Product: SG-MPG-ADD
Works with: 1983-1991
Product: BPR6EIX-4
Works with: 1986-1991
Product: 234-4018
Works with: 1986-1991
Product: 025-903-251
Works with: 1986-1991
Product: 251-937-071
Works with: 1986-1991
Product: 191-905-351B
Works with: 1974-1985
Product: GVW-OIL-HARNESS
Works with: 1986-1991
Product: 03-010
Works with: 1968-1985
Product: ALT-100
Works with: 1983-1991
Product: STARTER-SWITCH
Works with: All Vehicles
Product: 068-903-803D
Works with: 1980-1991
Product: STARTER-RELAY-KIT
Works with: 1968-1991
Product: 323-057
Works with: 1968-1991
Product: GW-027-133-459A-HDV
Works with: 1986-1995
Product: 213-1576
Works with: 1986-1991
Product: GVW-FUSE91
Works with: 1986-1991
Product: BR6ES-4
Works with: 1983-1991
Product: 04-038
Works with: 1980-1985
Product: 04-170
Works with: 1986-1991, 1993-1996
Product: 859-971-233-GW
Works with: 1980-1991
Product: 251-971-237-GW
Works with: 1980-1991
Product: GW-2PIN-BOSCH
Works with: 1980-1991
Product: GVW-FUSE85
Works with: 1980-1985
I replaced my 22 year old Bosch starter that had an intermittent solenoid with this new GoWesty unit. Works great and hope to get 22 years out of it.
Hey! My Syncro seems to start every time now! I can remove the steel rod and hammer that I would use to "inspire" the old one frequently.
It would have been easier to install if I had removed the skid plates first, but I was being stubborn.
On the other hand, when I installed the vacuum actuator for the rear diff lock, I predicted that if the vacuum gadget ever had to come out without removing the transaxle the roll pin connecting the shafts would have been a struggle, so it got replaced with a few tiny custom parts that didn't contribute to the five hour starter swap.
Excellent starter motor.
The starter is a technically improved design compared to the OEM Bosch starter specifically due to replacing the copper stator windings with a fixed magnet field. It's hard to tell if the starter provides a more robust start, but I feel better about the results. The old starter died with awful grinding scraping sounds. Nothing gradual about the failure, it just quit. After reading the GW tech review (recommended) I have an idea of why this happened. Two months before the starter failure I installed the GW solenoid bypass relay which provides more current directly to the starter windings, more than a 40-year-old starter motor could handle. I have confidence the starter will work as intended. I did not use the new upper bolt configuration as suggested, not enough clearance under the throttle body to pass the long bolt forward. I used the new hex bolt as a direct replacement for the OEM allen bolt. I did not remove the stud from the bell housing and stayed with the OEM configuration. I recommend this starter replacement as worthwhile preventative maintenance.
PS: No indication of where the starter was manufactured, but there is wording on the box indication the manufacturer is an American owned company.
no issues works as it should
nice new product. the only issue is the lack of information for the Synchro instal. maybe my '87 is different, but the squash nut is not needed, nor the long bolt included. The original bolt has to be used as the mount is a sealed end and not through the housing.
Good stuff, love the customer service, thanks for the help.
Perfect fit works perfect
HUGE improvement from the old original starter in my 1984 Vanagon.
It came quickly. As we are currently evacuated from our home due to a wildfire we haven’t had a chance to install it yet.
Super easy to install, fit perfectly and starts like a champ
Works amazingly well, and seems to start almost instantly now. One minor issue for me was that the binding post was too short. The connector from the alternator is a brass hollow cylinder almost 1/2 long, and so the binding post, with lock nuts attached, was too short to secure the main battery connector on top. Had to remove both nuts that were installed on the post, leaving it rattle around until installed, and barely had room for the lockwasher.
Works great
good starter
this thing always cranks.
This new starter seems 10x better than the original type starter. Makes it seem like I've got a fully charged new battery. no more long, slow power-draining start ups!
Great product. Works well and good price.
Worked wonderfully and the hardware it came with was a cherry on top!!!
We put a rebuilt Duralast starter from Autozone in our '84 van just 5 years ago. It started intermittently failing after a few years, finally completely died recently. Didn't want to keep dealing with starters every 5 years, so I was very excited to find that Gowesty had a high quality option in stock built for our vans. The starter is much smaller so it fits easier, and is much more powerful so it sounds great cranking over. The Duralast starter sounded so pathetic I kept checking my battery voltage because it sounded like a dead battery. But sure enough, was just a junk starter.
This starter might be the most expensive of your options, but like most gowesty parts it's well worth every dollar.
Rolls engine faster. Starts easier when hot.
I had a problem with my 1991 Westy not cranking over when I turned the key. So I determined it was not the fuel pump by the drop in voltage trying to turn the solenoid/starter. The problem is most likely the solenoid so I tried replacing it but alas, it was the starter. I went to GoWesty after getting a quote for a Bosch starter and found it to be about half the price. It was made in China and has, like some products made in the USA, a reputation but it's a starter and it is a pretty good bet they fine. I'm happy to be on the road again. The shipping and handling provided was exceptional.
Removed the TDI starter (2nd one that's failed) for good and went to this unit. Starts faster and sounds better than the TDI ones ever did turning over my 2700CC. Original bushing was good so I kept it in there.
Pro tip for Syncro add engine carry bar extended long bolts so you can drop down the engine via the bolts to access starter much easier. Also fits much more compact with locker actuator/bracket could possibly remove starter without taking bracket apart.
Hope it holds up well but can't be as bad as the TDI starts I ran across.
003-911-023E
Is this product 1.4KW?
This starter is rated at 1.0 KW, but our testing confirms that it cranks our 2.7-liter engine more effectively than the 1.4 KW gear-reduction starter we previously offered.
Is there a pdf manual &/or video for this starter install? Maybe I am missing something. The posted PDF & video seem to cover the starter hardware only, not the starter install. Thanks!
The installation is the same as OEM, so we recommend referencing the Bentley repair manual for installation.
Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.