Renogy DC-DC Charger / Solar Controller

Renogy DC-DC Charger / Solar Controller

$373.95
Skip to product information
Renogy DC-DC Charger / Solar Controller
Product: DC-DC-CHARGER
Works With: All Vehicles
Manufacturer: Renogy
Availability: Only 4 Left in Stock!
Wrench Rating: Requires a full tool set and broad mechanical knowledge.

$373.95

Does this part fit your vehicle? Log in to your account & update your profile!

This nifty charger by Renogy is simply the smartest and best value on the battery charging market. At a controlled 30A of output, this charger can take our GoWesty LiFePo4(100AH) Battery from dead to full in just three hours of driving! 

After hooking up only five wires, all of these features are handled by this Renogy charger:

  • Dual-Input Charging: Automatically combines alternator and solar power, prioritizing solar energy to reduce alternator load.

  • High Power Output: Delivers a maximum of 50A/720W output, capable of charging a 1.2kWh battery in approximately 1.8 hours.

  • IP67 Waterproof: Fully dust and waterproof enclosure designed for harsh, damp, or confined mounting locations.

  • Multi-Voltage Support: Features internal boost/buck logic to support both 12V and 24V system configurations.

  • Built-in MPPT: Integrated controller with 94% efficiency to maximize power harvest from solar panels.

If you're setting up an electrical system to quickly charge your auxiliary battery - and especially if you're jumping into the 21st century with a LiFePo4 battery setup - this DC-DC Charger could be everything you need in one box. Check out the "Features" tab to see more details on how all these fancy electronics interact.

Note: The Renogy DC-DC charger is designed exclusively for direct current (DC) input from your alternator and solar panels. It cannot be used with a standard 110V AC household outlet. If you need to charge from a 110V AC source, we recommend the NOCO Genius GenPro 10x2 Battery Charger. Also, this charger does not include the additional wires/terminals required to connect it to your batteries or solar panel.

Check out our full Auxiliary Battery Bundle
here.

IMPORTANT 30A CHARGING LIMIT NOTICE: It is imperative that the DC-DC charge controller be programmed to a maximum charging output of 30A. Download the DC Home App to make this change. Failure to do so can damage your Vanagon electrical system and the GoWesty auxiliary battery system, and may create a hazardous operating condition. We selected this 50A DC-DC charge controller specifically because of the advanced features it offers that lower-amperage units do not provide. However, the Vanagon electrical system, and the GoWesty auxiliary battery system designed to work with it, are intended for a maximum charging rate of 30A. While our 100Ah battery is capable of accepting charging rates up to 100A, the factory Vanagon charging system is not designed to safely support charging above 30A. A properly configured 30A charging rate remains fast, efficient, and safe for long-term use. If you wish to charge at rates higher than 30A, we also offer the battery and charge controller separately for use in custom-designed charging systems.