Keyless Entry System [Vanagon & Eurovan]

Keyless Entry System [Vanagon & Eurovan]

Keyless Entry + Actuator Kit
$76.00
Skip to product information
Keyless Entry System [Vanagon & Eurovan]
Product: GW-KEYLESS
Works With: 1980-1991, 1993-2003
Manufacturer: GoWesty
Availability: Only 2 Left in Stock!
Wrench Rating: Requires a full tool set and broad mechanical knowledge.

$76.00

Does this part fit your vehicle? Log in to your account & update your profile!

Keyless Entry Kit:
Fits Vanagons equipped with a factory power door lock (PDL) system that was operated using the key in either front door to unlock/lock all doors. Our GoWesty Keyless Entry kit taps into the factory PDL wiring harness and upgrades the existing system to keyless entry to unlock and lock all doors with the push of a button on a key fob in addition to using one of the keys in the front doors.

Fits Eurovans equipped with a factory power door lock (PDL) system that was operated using the key in either front door to unlock/lock all doors OR those with factory equipped keyless entry. Almost all Eurovans sold in the USA came equipped some sort of PDL, some with a keyless entry key fob that was part of the “master” key. If your Eurovan did not have keyless entry, our GoWesty Keyless Entry kit taps into the factory PDL wiring harness and upgrades the existing system to keyless entry to unlock and lock all doors with the push of a button on a key fob in addition to using one of the keys in the front doors. If your Eurovan came with a keyless entry key fob that was part of the key, you may find it is impossible or prohibitively expensive to find a replacement. Our GoWesty Keyless Entry kit replaces these expensive and hard to find OEM keyless entry fobs for a fraction of the price.

Keyless Entry + Actuator Kit:
This kit is for Vanagon without factory PDL, only: Most Vanagons did not come with any sort of PDL. This is an affordable, more complete GoWesty PDL kit with keyless entry for any Vanagon without factory PDL. This kit includes everything you need to add keyless operated PDL. Note: this kit adds PDL to the two front doors, only—not the slider or rear hatch.

Note: These kits involve cutting and splicing into wiring which may not be within everyone's ability. Read through these instructions carefully and decide if installing it is for you. If not, please take your vehicle to an automotive electrician. Wiring errors can be troublesome and hazardous.

Learn more by reading our Power Door Locks 101 article.

  • 5 stars: 9 (90%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (10%)
P
Peter S.
Thanks! The EVC really needed one.

Installed in ’97 EVC and working great with the first button push. As stated in the disclaimer in the installation PDF, this kit is likely “not within everyone’s ability” considering the wiring spaghetti bowl behind the fuse box of the EVC. Nonetheless, the instructions were clear, accurate, and took a little more than an hour – not counting the time it took to figure out how to access and lower the fuse assembly. For ease of installation, I chose to use Posi-tap splices in lieu of the provided T-taps to join the wires. Also the provided WAGO connector is troublesome and was replaced with a simple solder joint and crimp cap.

C
Christopher S.

Can't beat it for the price the installation was simple and easy follow the directions go westie gives you the only thing I had to do is swap the lock and unlock wire positions not a big deal the range is good very happy with the unit

a
alexis a.
Tired of rolling to get fresh air

Finally the time come to replace my old manual windows, feel like this ones will be a huge upgrade

R
Roger W.
Installed on 1997 Eurovan Camper

I have a 1997 EVC so the kit got doesn't have the actuators. It's not to difficult to install for someone comfortable with a little wiring (or learning it on YouTube). The space under the driver's side dash is tight but manageable. As you cut the wires that go in the WAGO connector and attach the male connectors, be sure to check each connection with a multimeter before installing in the van. I did find one issue with the directions. I had to swap the white wire and the white/black wire. The instructions GoWesty provided made the lock button unlocky and unlock bottom lock.

I would not bother with the fake alarm light. The idea is it flashes when the doors are locked making it look like an alarm is enabled. Oddly the light flashes whenever the doors are locked, like when you're driving. It's silly and VERY annoying.

I highly recommend this kit especially for the price.

D
Daniel M.
Amazing

Like a new car. It fits my viper alarm

I
Ichiro S.
Good for work

The cables connecting was not easy due to no empty space behind the fuse box. But this item is really comfortable.

R
Ryan B.
Hard to install

This is a difficult installation. I never finished it.

D
Dennis C.
Great System, works great

A couple of tips. On the 1st page of the PDF, the small screws for the actuator are in a different bag then the bag of screws for the actuator. Make sure you use the small screws that go through the door panel or if you use the large screws, you will screw them right into the actuator, and damage it. The 2nd tip again on the 1st page of the PDF, you can't read the measurement on cutting the rod. I think it is about 1 1/2 to 1 3/4 of an inch.

B
Barry B.
Keyless Entry System

System works fine van locks and unlocks from a good distance. Flashing park lights giving a visual confirmation of your action is an added bonus. I would not recommend this install for the inexperienced.

D
Daniel F.
Love these guys!

Great so far, new owner of a 1990 Vanagon