Sway Bar End Link [Syncro]

These swaybar links are thicker in the area that goes through the bushing than the others I have seen. In other words, you can use the stock sized bushing, with the others you would need a thicker walled bushing, which means the drop link is substantially weaker. Only issue I had was which direction to install them and possibly the right was mixed up versus the left. I installed them both, install the swaybar only to find that they were angled the wrong direction to go through the arm. I had to remove the swaybar remove both end links, and reinstall them on opposite ends Canted outward and bend to the rear. I easily remove them with a harbor, freight ball joint removing tool that was very inexpensive. I held the forked end under the rubber and put the smaller end on the very top of the sway bar. Held tight with hand and cranked with ratchet. I did squirt Windex in the bushing to sway bar area. Reinstalling was slightly more difficult, but I actually beat them on with a large hammer. Windex works wonders and evaporates shortly there after. I would like to suggest that GoWesty have an illustration made to show exactly how these go on each side. Angle and cant direction. Thank you for carrying the correct, and quality items needed for our vdubs.