Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.
Rear Heater Delete Kit [Vanagon]
| Product: | REAR-HEAT-DELETE |
|---|---|
| Works With: | 1982-1991 |
| Manufacturer: | GoWesty |
| Availability: | Low Stock |
| Wrench Rating: |
Looking to gain some extra space under your bench seat by eliminating your rear heater? Upgrading to a GoWesty Furnace?
This handy little kit has everything you need to cleanly eliminate your rear heater the right way. Don't just take out your heater and plumb the hoses together! This will reduce the efficiency of the front heater and you will still have leak potential under your bench seat. The GoWesty kit contains everything you need for a clean rear heater delete project.
Includes:
• (2) Straight fittings to replace the factory "T" fittings
• (4) Stainless clamps (if your stock ones are bad)
• (2) Body plugs to fill the heater hose holes that are left behind (for 28mm holes)*
• (1) Step-by-step installation instructions
* In very rare occasions, some vans feature 32mm holes in the body, and these plugs will be too small.
To download or print these instructions, click the arrow in the top-right corner of the viewer below, then use the print or download controls in the opened document. Open PDF in a new tab
Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
Product: GW-GASOLINE-FURNACE-BNDL
Works with: All Vehicles
Product: GVW-KICK
Works with: 1980-1991
Product: FURNACE-COVER-KIT
Works with: All Vehicles
Product: GW-LPG-TANK-B-GONE-KIT
Works with: 1980-1991
Product: GW-FURNACE-CONTROLLER
Works with: All Vehicles
Product: GW-REAR-ASHTRAY-B-GONE
Works with: 1980-1991
Product: CO-SMOKE-ALARM
Works with: All Vehicles
Product: GW-FURNACE-REMOTE
Works with: All Vehicles
Product: REAR-VENT-BLOCK
Works with: 1980-1991
Product: GW-FURNACE-VENT
Works with: 1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,19791980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003
Product: 253-260-797A
Works with: 1986-1991
Product: VANO-COND
Works with: 1983-1991
Product: GW-251-265-303C-AM
Works with: 1983-1991
Product: GW-HOTAIR-B-GONE
Works with: 1983-1991
Product: 253-260-633A
Works with: 1987-1991
Product: GVW-867-819-809
Works with: 1982-1991
Product: GVW-251-971-281
Works with: 1980-1991
Product: 251-819-015
Works with: 1980-1991
Product: 867-819-121A
Works with: 1983-1991
Product: HEATER-HOSE-16MM
Works with: 1983-1991
Product: 321-819-059-13
Works with: 1980-1991
Product: 867-959-131
Works with: 1983-1991
Product: REAR-HEATER-HOSE
Works with: 1983-1991
Product: 175-272-327
Works with: 1980-1986
Product: 253-260-109
Works with: 1987-1991
Product: HEATER-BOX-FOAM
Works with: 1980-1991
Product: 7P-AC-BKT
Works with: 1985-1991
Product: 251-265-473A
Works with: 1983-1991
Product: 251-265-054A
Works with: 1983-1991
Product: 251-265-053C-AM
Works with: 1983-1991
Product: GW-V-AC-RESISTOR-BRKT
Works with: 1985-1991
Product: 251-959-465
Works with: 1986-1991
Product: 171-819-809E
Works with: 1983-1991
Product: 321-959-513B
Works with: 1980-1991
Product: 251-259-371C
Works with: 1980-1991
Product: GW-255-919-383
Works with: 1983-1991
Product: 321-959-511A
Works with: 1986-1991
Product: 191-937-503
Works with: 1986-1991
Product: 171-959-511
Works with: 1980-1991
Product: HEATER-CORE-FOAM
Works with: 1983-1991
Product: GVW-251-259-14
Works with: 1980-1991
Product: CLIMATE-CONTROL-LABEL
Works with: 1983-1991
Product: 823-819-679
Works with: 1980-1991
I live in the SF Bay Area so never used my rear heater. When I happened upon this Go Westy solution I snatched them right up and installed them. Not only more storage space, but gained length for storing long items. Excellent option.
Simple a easy to kit for removing old leaky rear heater assembly.
Great product!! Thanks.
Worked great, plugs fit perfectly, love the extra room u see the bench!!! Highly recommend!!!
Simple straight forward fix for an unneeded leaking rear heater.
They were a great fit,made the job a lot easier,the dispatch and delivery was really fast,couldn’t be happier
Thanks
I built out my van a couple years ago and boy I wish I did this before doing that. While removing the heater I discovered the the entire original corkboard was saturated with coolant. So, van is now empty and I am redoing the whole process again.
GW made the delete very simple and easy though!
easy to install
Works perfectly
some years ago i bought a Propex heater, i installed it 3 weeks ago. That`s why i had to delete the hoses for the rear heater. Thank you.
Instructions provide no information on how to limit loss and spillage of engine coolant fluid inside and outside the van when you disconnect the heater core I can’t proceed with the project because of spill concerns
I deleted my rear heater to free up space in my bench for a battery bank. This kit made it quick and easy
all good no complaints.
Package arrived well packed and parts all look like they’re well made. Haven’t gotten to install yet. So far so good
Simple install
Easy to install and even better with the added storage space removing the rear heater!
More storage
Great to shop with
Glad I picked this up. Turned out that smell of coolant was the rear heater after all. Go ahead and order it for the inevitable day you decide to remove it.
It was tough getting those hose clamps off, but the product itself did a great job. Very satisfied. Installed the kit over a year ago. Holding up great
Nice little kit for the money. Poor quality hose clamps(one of mine stripped). Also, the caps included didn’t really fit my hole (they were too big). You could probably find the same pieces at Home Depot.
My rear heater decided to almost catch fire goi g down the freeway. Did not want to get another heater since we live in NC and it does not get that cold here and I will probably be upgrading to a propex in the future.
Works perfectly!
Best way to actually get rid of the coolant leak issues. If you’re rocking with propane or diesel heater it’s a no brainer
The heater core is a bit expensive and this was a great short term solution that also saves tons of space in the storage compartment
This kit has everything you need to remove your rear heater. Taking one star away because the holes in my van were 32mm and the plugs did not fit.
Hi Joe, thanks for the feedback. Every Vanagon we have seen has 28mm (1-3/32') holes for the hoses to pass through. Our provided plugs are for that size opening. We have made a note on the web page alerting folks that a larger 32mm opening does exist. Thank you for bringing this to our attention! Cheers.
Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.