Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.
Hall Sender Pigtail Kit
| Product: | VS-HALL-PIGTAIL |
|---|---|
| Works With: | 1986-1991 |
| Manufacturer: | Quality Aftermarket |
| Availability: | Low Stock |
Your Digifant Electronic Control Unit (ECU) absolutely needs to see a good signal from your distributor's hall sensor, or your waterboxer will simply not run. When you looked at your hall sensor assembly recently (and you likely have, because that connector often cracks where it meets the distributor) you may have noticed crusty terminals, fragile wires, and a disintegrating boot on the connector. Not very reassuring.
We're glad to offer you some peace of mind with this high quality replacement pigtail for the hall sender, which only takes minutes to install with a good crimp tool. This assembly includes a new connector with new wire and connector seals, a lock that hasn't been bent out of shape by impatient mechanics of yore, a fresh boot to prevent strain on the wires, and heat shrinkable splice connectors for a solid connection to your harness.
Fits: All 1986-91 Vanagon Waterboxer with Digifant Fuel Injection
Important Installation Note: The wire colors on factory pigtail changed at least 4 times within the 5 model years! The wire colors on our VS-HALL-PIGTAIL may not match your original harness exactly, and may even be reversed. When crimping the new wires to your existing harness, make sure to use the wire positions on the connector as reference for which wire goes where, because the wire colors may lead you astray.
Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
Product: GW-EFI
Works with: 1983-1991
Product: GVW-SCANGAUGE-KIT
Works with: 1983-1991
Product: ALT-MASTER-BUNDLE
Works with: 1983-1991
Product: GVW-TB-DF-N
Works with: 1983-1991
Product: 1-237-010-027
Works with: 1986-1991
Product: 025-906-457A
Works with: 1986-1991
Product: GVW-AL33-N
Works with: 1983-1991
Product: 003-911-023E
Works with: 1972-1991
Product: COIL-PLUG-BNDL
Works with: 1986-1991
Product: ECU-FLASHER
Works with: 1983-1991
Product: GW-LKC
Works with: 1983-1991
Product: 0-986-237-639-AM
Works with: 1986-1991
Product: D522C
Works with: 1986-1991
Product: 025-903-141HD
Works with: 1983-1991
Product: 213-4222
Works with: 1986-1991
Product: 0-280-122-014
Works with: 1983-1991
Product: 111-937-505M
Works with: 1980-1985
Product: 03-214
Works with: 1986-1991
Product: GVW-025-906-302A
Works with: 1986-1991
Product: PN-27462
Works with: 1983-1991
Product: 00061
Works with: 1983-1991
Product: GVW-MECH-TPS
Works with: 1983-1991
Product: HE568-ND
Works with: 1986-1991
Product: 021-998-031A-AM
Works with: 1972-1983
Product: ALT-HARNESS
Works with: 1983-1991
Product: ALT-ADJUST
Works with: 1983-1991
Product: SG-MPG-ADD
Works with: 1983-1991
Product: BPR6EIX-4
Works with: 1986-1991
Product: 234-4018
Works with: 1986-1991
Product: 025-903-251
Works with: 1986-1991
Product: 251-937-071
Works with: 1986-1991
Product: 191-905-351B
Works with: 1974-1985
Product: GVW-OIL-HARNESS
Works with: 1986-1991
Product: 03-010
Works with: 1968-1985
Product: ALT-100
Works with: 1983-1991
Product: STARTER-SWITCH
Works with: All Vehicles
Product: 068-903-803D
Works with: 1980-1991
Product: STARTER-RELAY-KIT
Works with: 1968-1991
Product: 323-057
Works with: 1968-1991
Product: GW-027-133-459A-HDV
Works with: 1986-1995
Product: 213-1576
Works with: 1986-1991
Product: GVW-FUSE91
Works with: 1986-1991
Product: BR6ES-4
Works with: 1983-1991
Product: 04-038
Works with: 1980-1985
Product: 04-170
Works with: 1986-1991, 1993-1996
Product: 859-971-233-GW
Works with: 1980-1991
Product: 251-971-237-GW
Works with: 1980-1991
Product: GW-2PIN-BOSCH
Works with: 1980-1991
Product: GVW-FUSE85
Works with: 1980-1985
Product: GVW-113-301-123A
Works with: 1968-1991
My previous wiring got baked because they ran it under the intake manifold and on top of the engine. Pulled the boot off the distributor and discovered wires were very brittle. I replaced the wire and ran it over the intake manifold and protected the wire with high heat insulation. thank you GoWesty for another outstanding product. r/Jeff
All the parts needed and simple install.
Cool
I have not installed it yet.
Most of the time these Hall sender wires become degraded over time. Mine was yanked off by a thrown drive belt (before I owned the van). Installation is simple and wiring is a breeze.
Arrived early, fit up perfectly, stock quality. I'm very thankful they had this. Just wish it was cheaper.
Arrived early, fit up perfectly, stock quality. I'm very thankful they had this. Just wish it was cheaper.
product as expected
Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.