Will these rear disc brake dust Shields fit my 1985 Vanagon Westfalia?

Yes, these Shields are designed to fit all 1980-1991 Vanagons, including your 1985 Westfalia, provided you have the GoWesty rear disc brake kit installed.

What exactly comes in the kit for these brake dust Shields?

The kit includes two durable 14-gauge stainless steel Shields and all the necessary mounting hardware. If your GoWesty rear disc brake kit was purchased before March 2020 and has black caliper adaptors, you might need two extra M8 bolts and nuts; otherwise, the included hardware is sufficient.

How will these Shields help protect my brakes?

These Shields are specifically designed to block dust and debris from reaching your GoWesty rear disc brake system. By keeping your pads and rotors cleaner, they will significantly prolong their lifespan, saving you money on replacements.

I saw a note about the finish not being shiny. Should I expect them to look rough?

That's right. These Shields are made from tough 14-gauge stainless steel and are built for function over form. GoWesty intentionally doesn't give them a shiny finish because they expect them to get dirty and potentially scuffed during normal use, especially when driving through puddles or gravel. Their primary purpose is protection, not aesthetics.

Rear Disc Brake Dust Shields [Bus/Vanagon] | GW-V-REAR-DISC-SHIELD

Name: Rear Disc Brake Dust Shields [Bus/Vanagon]
SKU: GW-V-REAR-DISC-SHIELD
Price: 60.0 USD
Availability: InStock

Rear Disc Brake Dust Shields [Bus/Vanagon]

Product:	GW-V-REAR-DISC-SHIELD
Works With:	1971-1991
Manufacturer:	GoWesty
Availability:	Low Stock

$60.00

Does this part fit your vehicle? Log in to your account & update your profile!

These durable and simple 14-gauge stainless steel dust & debris shields are made to protect your GoWesty rear disc brake system. Once installed, these shields will prolong the life of your pads and rotors.

Fits: All 1971-79 Bus & 1980-91 Vanagon with GW Rear Disc Brakes

Kit includes:
• (2) Stainless steel shields
• Mounting hardware*
• Detailed installation instructions

*If you have already purchased our rear disc brake kit before March of 2020, and your caliper adaptor is black in color (anodized aluminum), you will also need (2) M8 bolts, 35mm long and (2) M8 nuts to fit these splash shields on your brake kit. If you are purchasing these splash shields at the same time as the rest of the kit, you will not need any additional hardware.

Note: Don't expect a shiny or perfect finish on these stainless shields! We anticipate that they'll get dirty as you romp through puddles and gravel, and allow for some scuffs on their surfaces.