Can I install these GoWesty rear coil springs myself, or should I get a pro?

Installing GoWesty's rear coil springs is pretty challenging due to the coil-over design and necessary adjustments. We strongly recommend having a professional mechanic handle the installation to ensure it's done safely and correctly, especially to avoid issues with alignment, axle fit, or CV joints.

How do I choose between the 2" lowering, zero lift, or 1.5" lift spring options?

Your choice depends on desired ride height and driving preferences. If you want a slightly sportier stance with firmer ride, go for the 2" lowering springs. Zero lift springs will maintain your Vanagon's original height but improve ride quality and level the vehicle. The 1.5" lift option suits those needing extra clearance, but keep in mind it may impact CV joint wear and requires checking axle compatibility, especially if you use an automatic transmission.

Will these springs help fix my Vanagon’s sagging rear suspension?

Absolutely. GoWesty's dual-rate springs are designed to eliminate sag commonly seen on 2WD Vanagons. Customer feedback consistently praises how these springs restore proper ride height and improve overall vehicle leveling, giving your Vanagon a much better stance and handling feel.

Are these springs compatible with my automatic transmission 2WD Vanagon?

Yes, but with some caution. While the springs fit 1980-91 2WD Vanagons, lifted springs—especially the 1.5" lift option—can increase CV joint wear. It's important to verify your axle configuration and monitor CV joints if you have an automatic transmission to avoid premature wear after installation.

What kind of warranty coverage comes with the GoWesty rear coil springs?

GoWesty offers a limited lifetime warranty on these coil springs, guaranteeing no sag over time. If the springs prove defective, GoWesty also reimburses labor costs incurred for removal and replacement. This warranty provides extra peace of mind that you’re investing in a quality, long-lasting product.

Gowesty rear coil springs 2wd

Pair of gray rear coil springs for 2WD vehicle suspension, isolated on white background

GoWesty Rear Coil Springs [2WD Vanagon]

Product:	2WD-SPRING-REAR
Works With:	1980-1991
Manufacturer:	GoWesty
Availability:	Good Stock
Wrench Rating:	Requires a full tool set and broad mechanical knowledge.

$204.00

Does this part fit your vehicle? Log in to your account & update your profile!

One PAIR of GoWesty-designed dual-rate REAR 2WD Vanagon coil springs.

These springs are an exclusive GoWesty design. They are made right here in America by a leading automotive spring manufacturer that supplies many aftermarket companies. They feature an ultra-modern, hot wound (just like the OEM springs), dual-rate design based on the manufacturer's knowledge and our personal R&D over the past decade. They may look unusual, but they work. For the complete story on these springs, and a thorough explanation as to why they are the way to go, click here. Please click here for an informative response to the oft-asked question, "If I add lifting springs, do I have to install a longer shock?"

Options—Now you have a decision to make: Do you choose the 2" lowering, ZERO lift springs, or the 1.5" lift springs?

2" LOWERING: These springs will lower a 1980-91 Vanagon 2WD Westfalia camper about 2", bringing it down to roughly the factory height of a Multi-Van weekender model that came with factory lowering springs. On a lighter hard-top Vanagon (or single/double cab truck), expect a drop of 1” at most, and quite possibly zero depending on the year and model. These springs ride a bit firmer than our +0" and +1.5" springs, but they still offer a comfortable ride - especially with our new bumpstops.

ZERO LIFT: These are designed as a direct replacement for all 1980-91 Vanagon 2WD Westfalia campers and will maintain your factory ride height. If you have the much lighter hard-top Vanagon (or single/double cab truck), you will see a slight suspension lift of up to 1.5". If you have an engine conversion that has a different weight or weight distribution—something other than the Vanagon water-boxer engine—your Vanagon may not sit level. These springs are NOT designed to compensate for Vanagons with engine conversions. If you need additional leveling, we offer spring pads, sold separately. Keep in mind that certain models of Vanagon (like the Carat) have factory lowering springs, and they sit 1.5" to 2" lower than standard camper models; thus, these zero lift springs will actually lift your vehicle about 1.5" to 2" overall!

1.5" LIFT: These springs will provide roughly a 1.5" suspension lift for all 1980-91 Vanagon 2WD Westfalia campers. If you have the much lighter hard-top Vanagon (or single/double cab truck), these springs will provide too much lift for your suspension geometry. Don't say we didn't warn you! If you have an engine conversion that has a different weight or weight distribution—something other than the Vanagon water-boxer engine—your Vanagon may not sit level. These springs are NOT designed to compensate for Vanagons with engine conversions. If you need additional leveling, we offer spring pads, sold separately.

These are REAR springs only. Purchase FRONT springs here.

INSTALLATION NOTES: Does not require special tools to install. However, the installation of these springs is very difficult, even with a car hoist and all the correct tools. GoWesty recommends that a professional shop with alignment tools install these springs.

ADDITIONAL NOTES FOR LIFTING SPRINGS: If you have installed lifting springs (as opposed to our zero-lift springs), you will need to have the rear end re-aligned. It is important to note that our lifting springs will raise your Vanagon to its suspension limit—which means these springs are designed to get your vehicle as high as possible while still maintaining proper alignment specs. Please read this article for tips on correctly aligning your vehicle!

ADDITIONAL NOTES FOR 0" LIFT AND LOWERING SPRINGS: The difference in lengths between the spring being removed and the new GoWesty spring being installed IS NOT NECESSARILY the before/after resulting change in ride height once installed.

ADDITIONAL NOTE ON CV JOINTS: As the CV joints wear out, a wear pattern is created between the CV balls, inner, and outer races. Lifting your vehicle means the drive axles will now be riding at a different angle. Depending on how worn-out your axles are, this may cause a new vibration under load. The two remedies are to either replace the axles with a fresh set or rotate the CV joints so they are loaded in the opposite direction where there is little to no wear pattern to cause vibration. If your vehicle has identical axle lengths on left and right sides (not all models do), you can simply swap the axles left to right and the CVs will be loaded in the opposite direction. If the axles are not the same, the CV joints will have to be removed from the axles and moved to the opposite axle to achieve the same result. This is a good practice regardless of lifting as it will extend the life of your CV joints.

NOTE FOR AUTOMATIC TRANSMISSIONS: When fitting GoWesty lifting springs to a Vanagon with automatic transmission, you should be prepared to replace your axles with larger, heavy duty axles that are fitted with Porsche 930 Turbo CV joints. This is because there is a chance you will have a problem with the left side drive axle due to the fact it is shorter than the right one (and even shorter than both left and right on manual transaxle Vanagons). This very short AT-only left axle subjects the CV joints to a more severe angle. We have sold many sets of these springs for use on Vanagon with AT without complaint. But if your particular Vanagon happens to sit a bit higher, or the transaxle sits a little further to the left than average, or your shock absorber allows a little more down travel than the original ones—or a combination of all three—you might have an issue. The 930 CVs are capable of a greater angles and will solve the problem.

5 stars: 5 (83%)
4 stars: 1 (17%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

A Vanagon butt lift

The back of my westy was sagging about one and a half inches lower than the front from the old springs. Replacing them with new Gowesty 0” lift springs gave me back an inch in height. Now I won’t be staring at the ground through my rear view mirror anymore.

Sensacionales! la altura justa y un confort de marcha muy agradable! Saludos desde Argentina.

I only replaced the rear springs on my 1985 Vanagon, using the 1.5" lift. My Vanagon was sitting 2" lower in the rear. It now sits level with the front. I am very happy with the look.

I did not expect to have any issues with this modification however, with the increased transaxel angle, my <4k mile new CV joints wore out and broke within 1500 miles, they eventually broke leaving me stranded.
I have since purchased CV joints with 17mm in stead of 20mm balls which is supposed to allow for the increased Transaxel angle.
GoWesty please inform your customers of this issue.

Get rid of the rear sag.

My vanagon was suffering from the rear sag brought on by old age. I bought a pair of zero lift rear coil springs and with a pair of upper spring pads the old girl is sitting nearly level again. The installation was not easy but I was able with a little grunting to get back the level look she deserves.

A new ride

What a difference, Ride and handling are significantly better. May do the front next.

Perfect fit

Fix my saggy rearend perfectly

GoWesty Rear Coil Springs [2WD Vanagon]

GoWesty Rear Coil Springs [2WD Vanagon] Wrench Rating

All Wrench Ratings

Your cart is empty

Your cart is empty

When should we send your message?

Language

Language

GoWesty Rear Coil Springs [2WD Vanagon]

GoWesty Rear Coil Springs [2WD Vanagon] Wrench Rating

All Wrench Ratings

RELATED PRODUCTS

Fox 2.5 Shock and Spring Bundle (Front)[Syncro]

Fox 2.5 Shock Bundle (Rear)[Vanagon]

Fox Shock Absorber Set (Adjustable) [Syncro]

Fox Shock Absorber Set [2WD]

Fox Shock Absorber Set (Non-Adjustable) [Syncro]

Fox Shock and High Clearance Spring Bundle (Front) [Syncro]

Fox Shock and Spring Bundle (Rear) [Syncro]

Extra Heavy Duty Bilstein Shock Absorber Set [2WD Vanagon]

Bilstein Shock Absorber Set [2WD Vanagon]

Fox Shock - With Reservoir (Front) [Syncro]

Fox Shock (Front) [2WD]

Fox Shock - Rear [Syncro]

GoWesty Coil Spring Bundle [2WD Vanagon]

Coil Spring Bundle [4WD Syncro Vanagon]

Bilstein Shock Absorber Set [Syncro]

Fox Shock (Non-Reservoir Front) [Syncro]

High Clearance Spring Bundle (Front) [Syncro]

Fox Shock - Rear [2WD or Syncro]

GoWesty Rear Coil Springs [4WD Syncro Vanagon]

GoWesty Front Coil Springs [4WD Syncro Vanagon]

GoWesty Front Coil Springs [2WD Vanagon]

Extra Heavy Duty Bilstein Shock (Rear) [Vanagon]

Extra Heavy Duty Bilstein Shock (Front) [2WD]

Bilstein Shock Absorber (Rear) [2WD]

Bilstein Shock Absorber (Front) [2WD]

Suspension Limit Strap Set (Rear - 23") [2WD Vanagon]

Front Suspension Bushing Set [Vanagon]

Bilstein Front Shock [Syncro]

Lower Spring Perch for Fox 2.0 & OE-Style Springs [Syncro]

Bilstein Rear Shock [Syncro]

Suspension Hardware Kit (Rear) [Vanagon]

Bump Stop for Shock Absorber (Front) [Vanagon]

Tapered Sleeve Set (Lower Control Arm) [Syncro]

Spring Pad (Front Upper) [Vanagon]

Lower Control Arm Tapered Ring (2WD)

Washer for Shock (Heavy-Duty) [Vanagon & Eurovan]

Bushing Sleeve for Front Shock (Stainless)