Green Breather Hose on White Background

Hose for Crankcase Breather Tower

$10.95
Skip to product information
Green Breather Hose on White Background
  • Green Breather Hose on White Background
  • Green Breather Hose on White Background
  • Breathe Hose installed in Vanagon
Hose for Crankcase Breather Tower
Hose for Crankcase Breather Tower
Product: N-900-725-01
Works With: 1983-1991
Manufacturer: Quality Aftermarket
Availability: Good Stock
$10.95

Does this part fit your vehicle? Log in to your account & update your profile!

The breather hose on your engine's crankcase breather tower is a very simple yet important contributor to the overall health and good running of your motor. Over time, oil vapor from the crankcase will saturate the hose material, and cause it to collapse and restrict proper crankcase ventilation. This can contribute to a number of issues including excessive oil consumption.

Need a replacement breather tower and o-ring?

Installation Note:

This breather hose will only work for 1.9 and 2.1 liter water-cooled Vanagons.

The breather tower has a 19mm barb across all engines, but the opposite end varies based on the air warmer or barb on the air intake boot. For this reason this hose was made longer. If the OD on the intake boot barb is 19mm cut off the larger section of the hose. If the OD is 22mm cut away material from the longer 19mm ID section of hose so it mates up to the breather tower.
  • 5 stars: 7 (70%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 2 (20%)
  • 1 star: 1 (10%)
f
frank b.

Perfect fit .

A
Anonymous

ugly as hell, but works great

J
Jose Z.
Hose for crankcase breather tower

Fits perfect. Just wish it came in black. Thanks for your great part selection.

J
Jeff D.
Hose for Crank Case Breather Tower.

Great quality and construction! although my current breather tower and hose looked great I replaced them as a maintenance item. I believe these are superior to the original VW part. I would recommend you purchase and rate this as 5 stars. R/jeff

B
Brian M.
Variable diameter hose!

Fits perfect for those models that need two different diameters on each connection!
Finally, a hose that fits right. Thank you go Westy.

D
Dan E.
When doing it

Was already replacing the breather tower so it’s a good time to swap this out too

M
Matt D.
High quality, correct fit

Right parts for the job always make it easier. It’s the right hose for the job.

T
Thomas G.
Splitting after less than a year

This hose first started splitting at the in-line heat element, I taped it with heat tape, but it began to split open at the breather tube end causing a vacuum leak. I don’t think this hose is rated for high temps. Fail.

j
james K.
PCV hose from tower to intake boot

It's just a piece of rubber garden hose. It split when I forced on the connection. Luckily the hose comes longer than necessary so I cut the split out and used a heat gun to make it work.

Hi James, that hose is actually nylon reinforced silicone (to resist absorbing oil vapor and collapsing under crankcase pressure when hot), and is custom made for that application. You did a good thing using a heat gun to soften it up prior to installing it. If it splits again, let us know and we'll replace it for free. All the best, GW

C
Candace K.
Fits great

No problems