Will this bushing tool fit my Vanagon?

Yes! This Bushing Removal/Installation Tool is designed specifically for all 1980-91 VW Vanagon models, including both 2WD and 4WD Syncro versions. It works with automatic and manual transmissions and is suitable for any trim level, as long as your Vanagon is from model years 1980 through 1991.

How does this tool make bushing replacement easier compared to other methods?

This tool is purpose-built for Vanagon lower control arms and trailing arms, so you won't need a press or a shop full of specialty gear. It lets you remove and install bushings quickly and accurately, right on the vehicle, reducing the risk of damaging new bushings or surrounding components. Customers often mention in reviews that the process is smoother and faster than using makeshift methods like hammers, sockets, or vices.

What’s included with the bushing tool? Do I get instructions or support?

The kit comes complete with everything you need to remove and install lower control arm and trailing arm bushings on your Vanagon. Comprehensive step-by-step instructions are included to help you through the process, even if you’re new to suspension work. If you get stuck or have questions, GoWesty customer support and helpful online resources are available to get you back on track.

Any tips for avoiding damage to my new bushings and getting the job done right?

Absolutely! Make sure to clean the bushing mounting surfaces before installation and lubricate the tool as instructed to ensure smooth operation. Take your time to keep everything aligned and go slowly—forcing bushings in at an angle is a common mistake. If you run into excessive resistance, double-check alignment and tool setup before proceeding. User reviews highlight that careful preparation and patience lead to great results without damaging the bushings.

Do I need power tools to use this, and how do I take care of the tool afterward?

No power tools are required—this tool is designed for use with basic hand tools, making it ideal for a home garage. For safe use and the best results, always follow the included instructions. After you're done, clean the tool thoroughly and store it in a dry place to prevent rust. The tool is built to last and comes with a satisfaction guarantee, so you can shop with confidence.

Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm)

Name: Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm)
SKU: BUSH-TOOL-KIT
Price: 48.0 USD
Availability: InStock

Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm)

Product:	BUSH-TOOL-KIT
Works With:	1980-1991
Manufacturer:	GoWesty
Availability:	Good Stock
Wrench Rating:	Requires some hand & power tools and minimal mechanical knowledge.

$48.00

Does this part fit your vehicle? Log in to your account & update your profile!

Easily remove and install your Vanagon's lower control arm (LCA) or trailing arm bushing with this ingenious, easy-to-use tool!

If you've ever tried your hand at this job, you know how challenging it can be. We've ruined plenty of bushings in our shop, which inspired us to create this easy-to-use tool. Since then, we haven't destroyed a single bushing!

Works with: All 1980-91 Vanagon

Installation instructions included. Be sure to check out the video!

5 stars: 10 (91%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 1 (9%)
1 star: 0 (0%)

This is hard to write and keep a straight face

The metaphors are bubbling over but I must keep this G rated.

I read the Bentley and decided to make my own tool. Home Depot long PVC 2 Inch pipe coupler and a bolt and I was set.

The old ones came out pretty well. But I couldn't get the new ones started.

I cried Uncle and took it to the friendly local machine shop. They got them in but charged $140. And the flanges were cut.

I paid them, licked my wounds and ordered this bit of kit. It works well, but it's still fiddly. I needed to swap the pipe halfway through to draw the bushings beyond the end, and then reverse back to even them up. Each bushing is about 90 minutes work. How do the pros do it?

I slathered on silicone lubricant. Be sure to lubricate the pipe before extracting the old ones or they will get stuck and then you'll need another tool. My original did nicely.

If you tried to find these items yourself, I think you'd pay almost as much. Get this and save yourself the grief.

This is on the trailing arms on an 82.

Makes for a super easy install. Be sure to get this!

Weekend warrior

Great tool - couldn’t have done the job without this!

Tool failure on multiple levels

First of all I’d like to say that this was a great tool and very easy to use and it really saved a ton of time and effort.
However, despite my best efforts to keep the tool operating ( oil and hand tools) I was enormously disappointed when it wasn’t able to finish the task at hand.
I successfully uninstalled/ installed four of the six total bushings (two front and two rear) before both washers shattered and one of the needle bearings lost its needles.
After a brief regroup and some replacement washers I was able to easily uninstall/install the fifth bushing only to have the threaded rod and cap completely strip out mid install of the sixth and final bushing. I might add that it was going smoothly until it wasn’t.
So there I was. Broken tool with a bushing stuck in it, sun going down, my van not fixed and a huge pile of rage :(
I’d absolutely recommend this tool but I’d also recommend a needle bearing upgrade, different thread pitch, and probably higher quality material for the cap and threaded rod.

Bushing tool

Save yourself some time and frustration, buy this tools.

Bushing tool

Well made item

Bushing tool

This tool worked really well. Not sure I could have swapped out the lower control arm bushings without it

A must for the rear bushings

If you are going to do your own rear bushings get the tool, its worth it.

great product, worth the money, thank you Go Westy

good quality, fair price ..

Works well

Struggled with a homemade removal tool on the 1st bushing. Bought this and saved time and headache. It’s worth the money.

Stop struggling with bushings

Does the job and you don't need to be an engineer to figure out how to use it. Excellent tool

Can you tell me the diameter of the cup/sleeve and flat washer type bit? I'm wondering if this may work on trailing arm rear bushings for a Volvo 240. Thanks!

GoWesty

The outside diameter of the cup and washer is 63mm.

Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm)

Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm) Wrench Rating

All Wrench Ratings

Your cart is empty

Your cart is empty

When should we send your message?

Language

Language

Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm)

Bushing Removal/Installation Tool (Lower Control Arm & Trailing Arm) Wrench Rating

All Wrench Ratings

RELATED PRODUCTS

Hi-Lift Jack Bundle

Oil Change Starter Kit [Watercooled Vanagon]

Metric Automotive Tool Kit

Lower Ball Joint Press Tool [Bus/Vanagon]

Installation Tool (Flywheel Seal) [Bus/Vanagon]

Snap Installation Pliers

Grease Gun Nozzle (Right Angle)

Sway Bar End Link Bushing Tool [Vanagon]

Transaxle Drain Plug Kit

Heat Gun (1350 Watt)

Remote Starter Switch

Ear Clamp Pincer Pliers

Wire Crimp Tool with Extra Jaws

Oil Drain Pan

Oil Filter Wrench

Flywheel / Flexplate Lock Tool

Cable-Style Hose Clamp Pliers

Quick-Fix Self-Adhering Tape

Socket and Adapter (Rear Axle Nut) [Bus/Vanagon]

CV Joint Bolt Tool (M8)

Oil Pressure Switch Socket Tool

Wire Stripper and Cutter

Flex Funnel

12-Point Socket for CV Bolts (930 Axles) [Vanagon]

Oil Pump Puller Tool [Bus/Vanagon]

Rivet Nut Installation Tool

Circuit Tester "Test Light"

Transmission Plug Socket (17mm)

Snap Installation Tool

Gear Oil Drain Plug Tool (17mm)

VW Cable Tie with Barbed Mount (Pack of 5)

Hex Bit Tool (M10)

Hubcap Puller Tool

Decal Application Tool