Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.
Headlight Warning System
| Product: | LIGHTS-R-ON |
|---|---|
| Works With: | 1980-1991 |
| Manufacturer: | GoWesty |
| Availability: | Low Stock |
| Wrench Rating: |
If you've ever left your lights on and come back to a dead battery, this headlight warning system is for you! With this simple (yet ingenious) addition, your door buzzer* acts as a warning if you ever open your door with your lights ON and the key OUT of the ignition.
Fits all years of Vanagon*.
You will need a working headlight switch, seatbelt warning relay (323-919-433B - currently available used only), and drivers door switch.
*NOTE: Some headlight switches DO NOT have the correct terminals on the back! Look for terminals labeled 58L and 58R on the back of the switch. See pictures above for clarification. Our new switches have the needed terminals. Please verify that your switch has the correct terminals BEFORE ordering.
To download or print these instructions, click the arrow in the top-right corner of the viewer below, then use the print or download controls in the opened document. Open PDF in a new tab
Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
Product: 251-941-998
Works with: 1986-1991
Product: TWV-07
Works with: 1980-1991
Product: SQ-RND-GRILLE
Works with: 1986-1991
Product: LED-HEADLIGHTS
Works with: 1968-1991
Product: LED-EXT-VANO
Works with: 1980-1991
Product: GVW-111-112
Works with: 1980-1991
Product: BCW-941-781
Works with: 1980-1991
Product: BCW-941-782
Works with: 1980-1991
Product: GW-HDLT-BRKT
Works with: 1980-1991
Product: ADJUSTER-BUNDLE
Works with: 1986-1991
Product: GVW-141-142-CL
Works with: 1980-1991
Product: GVW-141-142-SMK
Works with: 1980-1991
Product: PN-70477
Works with: 1968-1991
Product: HEADLIGHT-COVER
Works with: 1986-1991
Product: 251-945-112A-AM
Works with: 1980-1991
Product: 251-945-111A-AM
Works with: 1980-1991
Product: GW-V-LPF-SA
Works with: 1980-1991
Product: GVW-DRL
Works with: 1980-1991
Product: 251-953-519C
Works with: 1980-1991
Product: 251-953-513-BK
Works with: 1980-1991
Product: GW-V-LPF-HL
Works with: 1986-1991
Product: 251-941-531M
Works with: 1980-1990
Product: GW-V-LPF-SAI
Works with: 1980-1991
Product: GW-V-LPF
Works with: 1968-1991
Product: GVW-SAG-WIRING
Works with: 1980-1991
Product: GW-LIGHT-BRKT-BAR
Works with: 1980-1991
Product: GW-LIGHT-BRKT-UNI
Works with: 1980-1991
Product: 251-943-021A-AM
Works with: 1980-1991
Product: LED-TURN-RELAY
Works with: 1980-1991, 1993-1997
Product: 171-953-053A-KIT
Works with: 1980-1991
Product: GW-V-LPF-TS
Works with: 1980-1991
Product: 251-971-867-KIT
Works with: 1980-1991
Product: 251-953-142AM
Works with: 1980-1991
Product: 251-953-141AM
Works with: 1980-1991
Product: 321-945-361A-LED
Works with: 1980-1991
Product: 113-945-515H
Works with: 1980-1991
Product: H5-LED
Works with: 1986-1991, 1993-1995
Product: H4-LED
Works with: 1968-1991, 1996-2003
Product: H3-LED
Works with: 1986-1991, 1993-2003
Product: 020-941-521A
Works with: 1984-1988
Product: GVW-251-943-139-FIX
Works with: 1980-1991
Product: H3-HE55+90
Works with: 1986-1991, 1993-2003
Product: H4-HE-5560
Works with: 1968-1991, 1996-2003
Product: 171-953-053A
Works with: 1980-1991
Product: LED-EXT-RESISTOR
Works with: 1968-1991, 1997-2003
Product: 255-941
Works with: 1986-1991
Product: 111-953-227D
Works with: 1971-1991, 1993-2000
Product: 533-941-669
Works with: 1980-1991
Product: 251-971-867
Works with: 1980-1991
Product: H4-PLUG-KIT-2
Works with: 1968-1991
The small contact that plugs into the headlight connector does not have a locking tab to retain it in the switch connector. The first kit sent had this contact poorly crimped and I noticed that the tab was not there (I thought it had been smashed flat during crimping). Sent pictures to GW and asked for another wire and for them to verify the replacement was correctly made before sending. It was crimped OK, but no locking tab. I made this cable work by crimping on my own contact that has a tab. The attached photos show the contact installed on the wires I received versus the one with tab from the website.
Hi David, you are absolutely correct that the connector should have had the locking tab. We inspected our stock, and are fixing all of them today. I have just sent you a $20 e-Gift Card to take a bit of the sting out of the hassle you experienced. Thanks you for your feedback and understanding. All the best, Taylor
Awesome inexpensive and easy to install product. Works great and will save my battery a hundred times over.
simple and effective to add warning buzzer
This is a great little addition, mine first one had an issue and GW was very quick to resolve with zero issues. Thank you for this great product.
Don't risk killing your battery, just buy this inexpensive kit.
Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.