Will this Rear Coil Spring Spacer Pad fit my Vanagon or Eurovan?

Yes, this spacer pad is designed specifically for Vanagon and Eurovan models that use rear coil springs. It's a direct fit for most model years. For best results, check your van's suspension setup or contact us if you're unsure about compatibility.

Do I need to install one or two spacer pads for my vehicle?

Many owners install a pair (one on each side) for even ride height, especially if you're correcting general sag or adding lift. If you only notice sagging on one side—like from a heavier kitchen or engine swap—a single spacer may do the trick. Assess your van's needs to decide what's right for you.

How difficult is it to install these spacer pads? Can I do it myself?

Installation is straightforward and can often be a DIY job with basic tools. You'll need to safely raise the rear of your van and unseat the coil spring to fit the pad on top. Many customers report the process takes less than an hour. If you're comfortable working on your suspension, you should have no trouble.

What are these spacer pads made of?

Our spacer pads are made from durable, high-quality polyurethane, designed to withstand years of use. This material resists wear, moisture, and road debris, ensuring consistent performance and a long service life.

Can these spacer pads help solve rear sag from heavy cargo or engine conversions?

Absolutely! Many customers use these pads to correct rear-end sag caused by added weight from engine swaps, campers, or heavy gear. They're a cost-effective way to restore level ride height and improve the look and handling of your van.

Rear Coil Spring Spacer Pad (Upper) | 7D0-511-147A

Name: Rear Coil Spring Spacer Pad (Upper)
SKU: 7D0-511-147A
Price: 25.0 USD
Availability: InStock

Rear Coil Spring Spacer Pad (Upper)

Product:	7D0-511-147A
Works With:	1980-1991, 1993-2003
Manufacturer:	GoWesty
Availability:	Good Stock

$25.00

Does this part fit your vehicle? Log in to your account & update your profile!

These spring spacer pads are just what you need to add some height to the rear suspension of your Vanagon or Eurovan. Each pad adds 1/2" to rear suspension.

Sold individually.

Vanagon owners: Even if you have the exclusive GoWesty springs (2WD or 4WD), you may need some of these to level your ride height in the rear, or level it side-to-side, depending on the way you normally load your vehicle. or if you have heavier engine conversions, and the associated rear-end sag, these pads are a simple and inexpensive remedy.

Eurovan owners: If you are performing a "Lift & Level" on your Eurovan, you will need a couple of these pads, plus a few other parts. Please carefully read the Eurovan Instructions document in the tab above.

5 stars: 14 (88%)
4 stars: 1 (6%)
3 stars: 1 (6%)
2 stars: 0 (0%)
1 star: 0 (0%)

Very good Quality

The spacers were received very quickly. I found that their quality was outstanding, and the ease of installation took about 30 minutes for both sides. These spacers lifted my Tin-Top to the correct height. I highly recommend these to anyone who needs a little lift or leveling out for the rear of their van. Quick pro tip: Make sure you install the spacer against the body/Uni-Frame, then install the rubber factory spacer. You can see it in the photo I have provided.

Thank you, Go-Westy!!

Works as it should

fits

I assume this levels the Van because my Van is level. I installed this right away after my Van purchase. and didn't check to see if my Van was not level before. This was installed with the taller springs and HD struts

Definitely needed!!

After installing the GoWesty springs, I needed this to level out the van

Rear spring spacer

I will install it but I was expecting it to be made of metal. Instead its made of some kind of composite. the description may have said that. If so I missed it.
I have always been satisfied with purchases from Go Westy and their support is excellent. This is an exception

Excellent quality

Excellent quality and thoughtful design — highly recommended for fellow van enthusiasts considering a purchase.

Amazing

Amazing

Great Part

The rear end of my vanagon was sagging from old age so I bought a number of parts to raise its sagging butt back up. The upper spring spacer was just what I needed along with new Go Westy springs. The spacers did the trick and the sag is gone. So Happy.

Clean

had installed by shop so I can't speak to how the install went, but it hasn't broken in a year of use.

Rear Coil Spring Pad

I'm lifting my van so nice to have these around. Have not used yet but will be lifting my van shortly.

For hip up

Just fit and easy instole!

Just what I needed!

Added just enough lift to the rear of my van!

spacer pads

one of the best companies ive dealt with. great response to my questions. fits as advertised

Yup

So you’re telling me that all I needed to fix my sag this whole time was this simple solution? Yup… you were right! I’ll be grabbing two more to level my van out even better. Thanks!

Does it's job

Cheap spacers that work well

Spacer pads

Nothing better , didn't have the Grove in it, like the original. No info on go westy site, if that was important. That would be helpful

Hi there Ezekial, this spacer pad is designed to install between the body and the original coil spring pad with the groove in it. Please be sure you do not install it directly on top of your coil spring. Check out the installation image on the product page. Cheers!

Rear Coil Spring Spacer Pad (Upper)

Your cart is empty

Your cart is empty

When should we send your message?

Language

Language

Rear Coil Spring Spacer Pad (Upper)

RELATED PRODUCTS

Fox 2.5 Shock and Spring Bundle (Front)[Syncro]

Fox 2.5 Shock Bundle (Rear)[Vanagon]

Fox Shock Absorber Set (Adjustable) [Syncro]

Fox Shock Absorber Set [2WD]

Fox Shock Absorber Set (Non-Adjustable) [Syncro]

Trailing Arm Set (Standard Length)

Fox Shock and High Clearance Spring Bundle (Front) [Syncro]

Fox Shock and Spring Bundle (Rear) [Syncro]

Extra Heavy Duty Bilstein Shock Absorber Set [2WD Vanagon]

Bilstein Shock Absorber Set [2WD Vanagon]

Fox Shock - With Reservoir (Front) [Syncro]

Trailing Arm - Standard Length (Passenger Side) [Vanagon]

Trailing Arm - Standard Length (Driver Side) [Vanagon]

GoWesty Lower Control Arms [Syncro]

Fox Shock (Front) [2WD]

Fox Shock - Rear [Syncro]

Wheel Bearing Housing (Rear) [Vanagon]

GoWesty Coil Spring Bundle [2WD Vanagon]

Coil Spring Bundle [4WD Syncro Vanagon]

Bilstein Shock Absorber Set [Syncro]

Fox Shock (Non-Reservoir Front) [Syncro]

High Clearance Spring Bundle (Front) [Syncro]

Fox Shock - Rear [2WD or Syncro]

Radius Rod Assembly [Syncro]

GoWesty Rear Coil Springs [4WD Syncro Vanagon]

GoWesty Front Coil Springs [4WD Syncro Vanagon]

GoWesty Rear Coil Springs [2WD Vanagon]

GoWesty Front Coil Springs [2WD Vanagon]

Extra Heavy Duty Bilstein Shock (Rear) [Vanagon]

Extra Heavy Duty Bilstein Shock (Front) [2WD]

GoWesty Upper Control Arm Bushing (Full Set)

Bilstein Shock Absorber (Rear) [2WD]

Bilstein Shock Absorber (Front) [2WD]

Suspension Limit Strap Set (Rear - 23") [2WD Vanagon]

Front Suspension Bushing Set [Vanagon]

Bilstein Front Shock [Syncro]

Lower Spring Perch for Fox 2.0 & OE-Style Springs [Syncro]

Bilstein Rear Shock [Syncro]

Lower Ball Joint Insert [Syncro]

Front Sway Bar Bushing Bundle [Vanagon]

GoWesty Lower Control Arm Bushing Kit (For 2 Arms)

Suspension Hardware Kit (Rear) [Vanagon]

Sway Bar End Link Assembly (Heavy-Duty) [Vanagon]

Lower Ball Joint Press Tool [Bus/Vanagon]

Lower Ball Joint (Heavy-Duty Adjustable) [Bus/Vanagon]

Radius Rod [2WD Vanagon]

BARGAIN BASEMENT - Sway Bar End Link [Syncro]

Bump Stop for Shock Absorber (Front) [Vanagon]

Upper Ball Joint (Long Pin/HD Adjustable) [All Vanagon]

Upper Ball Joint Spacer Kit [Vanagon]