Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.
Charcoal Emissions Canister
| Product: | 1H0-201-801C |
|---|---|
| Works With: | 1968-1991 |
| Manufacturer: | Quality Aftermarket |
| Availability: | Good Stock |
Activated charcoal canister for the emissions/fuel evap system. This cannister is the closest replacement part available, but the inlet or outlet may differ from your vehicle, and you may have to get a little creative to plumb it in.
Fits: All 1968-91 Type II Bus & Vanagon
Reference numbers can be OE part numbers, superseded part numbers, and compatible part numbers. We provide this information to help ensure you're getting the right part for your needs.
Proposition 65: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
Product: GW-EFI
Works with: 1983-1991
Product: GVW-TB-EFI-NEW
Works with: 1983-1991
Product: INJECTOR-BUNDLE
Works with: 1983-1991
Product: GVW-SCANGAUGE-KIT
Works with: 1983-1991
Product: FUELLINE-MASTER-BUNDLE
Works with: 1980-1991
Product: GVW-TB-DF-N
Works with: 1983-1991
Product: VANOTANK-SYNCRO
Works with: 1986-1991
Product: MAF-HOUSING-BILLET
Works with: 1983-1991
Product: 251-201-075
Works with: 1980-1991
Product: 251-201-600-GW
Works with: 1986-1991
Product: 251-971-071FM
Works with: 1986-1991
Product: 025-906-457A
Works with: 1986-1991
Product: 0-280-160-205
Works with: 1983-1991
Product: GW-FUELHOSE
Works with: 1975-1991
Product: GW-CRANK-POSITION
Works with: 1983-1991
Product: COIL-ON-PLUG-BRK-KIT
Works with: 1983-1991
Product: HEAT-SHIELD
Works with: 1980-1991
Product: COIL-PLUG-BNDL
Works with: 1986-1991
Product: SYNCRO-SENDER-KIT
Works with: 1986-1991
Product: ECU-FLASHER
Works with: 1983-1991
Product: VANOTANK
Works with: 1980-1991
Product: GW-LKC
Works with: 1983-1991
Product: D522C
Works with: 1986-1991
Product: 213-4222
Works with: 1986-1991
Product: 0-280-122-014
Works with: 1983-1991
Product: 13-957
Works with: 1986-1991
Product: GW-CRANK-POSITION-UPDATE-KIT
Works with: 1983-1991
Product: 251-906-091
Works with: 1975-1991
Product: GVW-025-133-317-SQ
Works with: 1983-1991
Product: GVW-025-906-302A
Works with: 1986-1991
Product: 251-919-051K-AM
Works with: 1980-1991
Product: 251-201-303C
Works with: 1980-1991
Product: 251-201-304C
Works with: 1980-1991
Product: 251-919-051H-AM
Works with: 1986-1991
Product: FVG-BNDL
Works with: 1980-1991
Product: 251-201-145B-AM
Works with: 1986-1991
Product: HE568-ND
Works with: 1986-1991
Product: 251-201-117C
Works with: 1986-1991
Product: GVW-VANO-FF-UPGRADE
Works with: 1980-1985
Product: SG-MPG-ADD
Works with: 1983-1991
Product: SYNCRO-FUEL-FILLER
Works with: 1986-1991
Product: 251-201-147B-AM
Works with: 1980-1991
Product: FUELLINE-HARDLINE-BUNDLE
Works with: 1980-1991
Product: BPR6EIX-4
Works with: 1986-1991
Product: 234-4018
Works with: 1986-1991
Product: 11-027
Works with: 1979-1985
Product: INJ-RESEAL-KIT
Works with: 1983-1991
Product: 251-201-166
Works with: 1983-1991
Product: FUELLINE-7MM-HQ
Works with: 1983-1991
Product: GW-251-919-133-FKM
Works with: 1986-1991
All the same, except for the bottom air intake that goes to frame of 90 westfalia.
I added a small air filter 👍
Fit and worked good
Installed this on my 1991 and it eliminated the clunk sound from my fuel tank I was getting from the fuel tank after coming to a stop from not venting properly. My old one was difficult to blow through the bottom large port. The new one was easy to blow through. I had to adapt the oval port with a heat gun and this: amazon.com/dp/B0FH3T6ZP9 It works great and all the hoses fit perfectly.
good to replace 36 year old charcoal canister with fresh , helps contain fuel vapors .This now completes my fuel tank after resealing tank
Simple plug and play replacement on a 1984 vanagon.
Took alittle work but fit great!
I replaced the check valve & canister as my gas tank would expand & contract due to system plugged from these units. When driving and coming to a stop I would hear a big clunk from the tank suddenly expanding from the influx of air. With these new units it has been fixed.
Easy to replace. Located at right rear tire which needs to be jacked up(no need to remove). Undo clamp & hoses. See check valve review on connecting hose. Hole at bottom is for air intake and original outlet hose goes into frame. This canister hole is bigger and oval so you'll need to come up with alternate fitting and routing.
Exelent
Gifting has never been easier
Perfect if you're short on time or are unable to deliver your gift yourself. Enter your message and select when to send it.